본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

Graphite 첨가에 따른 $Ti(C_xN_{1-x})$세라믹스의 물성
Effect of Graphite Additions on the Properties of $Ti(C_xN_{1-x})$ Ceramics

고준    (충남대학교 재료공학과   ); 최영민    (한국화학연구소 화학소재연구단   ); 이재도    (한국화학연구소 화학소재연구단   ); 김종오    (충남대학교 재료공학과  );
  • 초록

    Titanium carbonitride (Ti(CxN1-x)) ceramics were prepared by hot pressing of the mixture of TiN and graphite. Hot pressing was performed in a graphite mold at 198 $0^{\circ}C$ for 40 min under 44 MPa in N2 atmosphere. The effect of graphite addition on sinterability and the mechanical properties of titanium carbonitride were investigated. In this study, the solubility limit of graphite in Ti(CxN1-x) was slightly below 10 wt% based on the results of XRD analysis. Within the solubility limit, graphite dissolved completely into titanium nitride and formed the single phase Ti(CxN1-x) solid solution. Peak relative density of 99% and hardness of 16 GPa were observed for Ti(CxN1-x) ceramics with 7 wt% graphite while maximum flexural strength of 500 MPa and fracture toughness of 4.0 MPa.m1/2 were observed for Ti(CxN1-x) ceramics with 10 wt% graphite. The electrical resistivities of the ceramics with 7 wt% and 10 wt% graphite were observed 40 {{{{ mu OMEGA }}cm and 50 {{{{ mu OMEGA }}cm respectively.


  • 주제어

    Titanium carbonitride .   Graphite .   Solid solution .   flexural strength .   Toughness .   Electrical resistivity.  

  • 참고문헌 (23)

    1. Factors Affecting the Porosity and Bending Strength of Ti(CN)TiB₂Materials , Tadahiko Watanabe;Hideki Yamamoto;Kazuhisa Shobu;Tadashi Sakamoto , J. Am. Ceram. Soc. / v.71,pp.C202-C204,
    2. Internal Stress in Ceramics , J. Selsing , J. Am. Ceram. Soc. / v.44,pp.419,
    3. Electrical Machining of Advanced Ceramics , Nancy F. Petrofes;Ahmed M. Gadalla , Ceram. Bull. / v.67,pp.1048-1052,
    4. Bonding Study of TiC and TiN , A. Dunand;H. D. Flack;K. Yvon , Physical Rev. B / v.31,pp.2299-2315,
    5. Hot Pressing of Ti(C,N)-TiB₂System , Kazuhisa Shobu;Tadahiko Watanabe;Hideki Yamamoto , Yogyo-Kyokai-Shi / v.93,pp.252-256,
    6. Properties of TiCN Coatings Prepared by Magnetron Sputtering , Deng Jian-Guo;Braun Manuel;Gudowska Irena , J. Vac. Sci. Tech. A / v.12,pp.733-736,
    7. Dieter K. Schroder , Semiconductor Materials and Device Characterization / v.,pp.1-40,
    8. A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: II Strength Methods , P. Chantikul;G. R. Anstis;B. R. Lawn;D. B. Marshall , J. Am. Ceram. Soc. / v.64,pp.539,
    9. Chemically Induced Migration of Liquid Films and Grain Boundaries in TiN-Ni-(TiC) Alloy , Y. J. Baik;K. Y. Eun , J Am. Ceram. Soc. / v.74,pp.1397-1400,
    10. Ceramic Heater , Yamaguchi(et al.) , U.S. Patent 4,549,905 / v.,pp.,
    11. Fabrication and Mechanical Properties of TiB₂-Ti$(N_xC{1-x})$ Composites by Reaction Sintering of B₄C and TiN Powders , Minoru Moriyama;Hiroo Aoki , J. Ceram Soc. Jpn / v.104,pp.333-339,
    12. Phase Relationships in the Binary Systems of Nitrides and Carbides of Zirconium. Columbium, and Vanadium , P. Duwez;F. Odell , J. Electrochemical Soc. / v.97,pp.299,
    13. W-Ti-C-N계 초경 복합재의 제조와 내마모성 및 기계적 성질 , 박상희;Helmut Holleck , J. Kor. Ceram. Soc. / v.31,pp.25-30,
         
    14. 이준근 , 세라믹스의 소결 / v.,pp.138,
    15. Measurement of Sheet Resistivities with the Four-Point Probe , F. M. Smit , The Bell System Tech. J. / v.,pp.711-718,
    16. Transition Metal Carbides and Nitrides , Louis E. Toth;John L. Margravc(ed.) , Refractory Materials / v.7,pp.1-28,
    17. Densification and Characteristics of TiN Ceramics , T. Graziani;A. Bellosi , J. Mater. Sci. Lett. / v.14,pp.1078-1081,
    18. Frietional Properties of Sintered TiN-TiB₂and Ti(CN)-TiB₂Ceramics at High Temperature , Kazuhisa Shobu;Tadahiko Watanabe , J. Am. Ceram. Soc. / v.70,pp.C103-C104,
    19. R. Landaur , J. Appl. Phys. / v.23,pp.779,
    20. Electrical Resistivity in the Titanium Carbonitride-Zirconia System , E. Barbier;F. Thevenot , J. Mater. Sci. / v.27,pp.2383-2388,
    21. Effects of Carbide Addition on the Mechanical Properties of the $Ti(C_{0.5}N_{0.5})$-30wt% TiB₂-Carbide Sintered Compacts , Tadahiko Watanabe , J. Ceram. Soc. Jpn. / v.99,pp.146-149,
    22. Vacuum Sintering of Ti(C,N)-Cr₃C₂Mixed Powder , Mookyung Kim;Tadahiko Watanabe;Hideki Yamamoto , J Ceram. Soc. Jpn. / v.97,pp.125-130,
    23. Titanium Carbonitride, Ti(C,N) Electronic Structure and Chemical Bonding , E. Gustenau-Michalek;P. Herzig;A. Neckel , J. Alloys and Compounds / v.219,pp.303-306,

 저자의 다른 논문

  • 고준 (1)

    1. 1996 "인장강도 시험을 통한 질화규소 소재의 설계계수 계산" 요업학회지 = Journal of the Korean Ceramic Society 33 (6): 709~717    
  • Choi, Young-Min (10)

  • 이재도 (19)

  • 김종오 (64)

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
  • NDSL :
  • 한국세라믹학회 : 저널
유료다운로드

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 출판된 논문 + 더보기