본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

두가지 기구운동을 하는 타이타늄 합금과 스테인레스 스틸 디스크에 대한 초고분자량 폴리에틸렌 핀의 마멸
Wear of UHMWPE Pins Against Ti-alloy and Stainless Steel Disks Moving in Two Kinematic Motions

이권용   (세종대학교 기계항공우주공학부UU0000792  ); 김석영   (영남대학교 금속 및 재료공학부UU0000951  ); 김신윤   (경북대학교 정형외과학교실UU0000096  );
  • 초록

    The wear behaviors of ultrahigh molecular weight polyethylene pins against titanium alloy and stainless steel disks moving in two different kinematic motion were investigated by conducting repeat pass rotational sliding and linear reciprocal sliding wear tests. Linear reciprocal motion wore more the polyethylene pin than did repeat pass rotational motion for both disk materials. It means that the repeated directional change of contact stresses generates more wear debris in polyethylene. For the linear reciprocal sliding tests, titanium alloy disks were damaged with some scratches after one million cycles but no surface damage was observed on the polyethylene pins. On the other hand, fur the repeat pass rotational sliding tests, all titanium alloy disks were severely abraded on the entire region of sliding track. This phenomenon can be interpreted by that stress fatigue under repeated sliding contact initiated titanium oxide layer wear particles from disk surface, and these hard particles were embedded into polyethylene pin and then they severely abraded the disk surface. From these results it can be concluded that the kinematic motion in pin-on-disk wear tests play a crucial role on the wear behaviors of UHMWPE pins against titanium alloy and stainless steef discs.


  • 주제어

    wear .   kinematic motion .   UUMWPE .   Ti-alloy .   stainless steel.  

  • 참고문헌 (18)

    1. A tribological study of retrieved hip prostheses , G.H. Isaac;B.M. Wroblewski;J.R. Atkinson;D. Dowson , Clin. Orthop. / v.276,pp.115-125,
    2. Wear of polyethylene cups in total hip arthroplasty , C.J. Sychterz;K.H. Moon;Y. Hashimoto;K.M. Terefenko;C.A. Engh. Jr.;T.W. Bauer , J. Bone Joint Surg. / v.78A,pp.1193-1200,
    3. In vivo wear of Ti6Al4V femoral heads: A retrieval study , T.E. McGovern;J. Black;J.J. Jacobs;R.M. Graham;M. LaBerge , J. Biomed. Mater. Res. / v.32,pp.447-457,
    4. In vivo wear of polyethylene acetabular components , J.M. Kabo;J.S. Gebhard;G. Loren;H.C. Amstutz , J. Bone Joint Surg. / v.75B,pp.254-258,
    5. Shapes and dimensional characteristics of polyethylene wear particles generated in vivo by total knee replacements compared to total hip replacements , T.P. Schmalzried;P. Cambell;A.K. Schmitt;I.C. Brown;H.C. Amstutz , J. Biomed. Mater. Res. (Appl. Biomater.) / v.38,pp.203-210,
    6. Digital edge-detection measurement of polyethylene wear after total hip arthroplasty , C.M. Shaver;T.D. Brown;S.L. Hillis;J.J. Callaghan , J. Bone Joint Surg. / v.79A,pp.690-700,
    7. Mechanism and clinical significance of wear debris-induced osteolysis , H.C. Amstutz;P. Cambell;N. Kossovsky;I.C. Clarke , Clin. Orthop. / v.276,pp.7-18,
    8. Wear-accelerated corrosion of Ti6Al4V and nitrogenion-implanted Ti6Al4V: Mechanisms and influence of fixed-stress magnitude , R.A. Buchanan;E.D. Rigney, Jr.;J.M. Williams , J. Biomed. Mater. Res. / v.21,pp.367-377,
    9. The importance of multidirectional motion on the wear of polyethylene , C.R. Bragdon;D.O. O'Connor;J.D. Lowenstein;M. Jasty;W.D. Syniuta , Proc. Instn. Mech. Engrs., Part H: J. Eng. Med. / v.,pp.157-165,
    10. Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint replacement prostheses , A. Wang;C. Stark;J.H. Dumbleton , Proc. Instn. Mech. Engrs., Part H: J. Eng. Med. / v.210,pp.141-155,
    11. Measurement of polyethylene wear in acetabular components inserted with and without cement, A randomized trial , P.A. Devane;E.J. Robinson;R. B. Bourne;C.H. Rorabeck;N.N. Nayak;J.G. Horne , J. Bone Joint Surg. / v.79A,pp.682-689,
    12. Composition and morphology of wear debris in failed uncemented total hip replacement , A.S. Shanbhag;J.J. Jacobs;T.T. Glant;J.L. Gilbert;J. Black;J.O. Galante , J. Bone Joint Surg. / v.76B,pp.60-67,
    13. A multidirectional motion pin-on-disk wear test method for prosthetic joint materials , V. Saikko , J. Biomed. Mater. Res. / v.41,pp.58-64,
    14. Wear of shelf-aged UHMWPE acetabular liners , K.Y. Lee;K.H. Lee , Wear / v.225-229,pp.728-733,
    15. Measurement of polyethylene wear in metal-backed acetabular cups,Ⅱ. Clinical application , P.A. Devane;R.B. Bourne;C.H. Rorabeck;S. MacDonald;E.J. Robinson , Clin. Orthop. / v.319,pp.317-326,
    16. Periprosthetic osteolysis in total hip arthroplasty: the role of particulate wear debris , W.J. Maloney;R.L. Smith , J. Bone Joint Surg. / v.77A,pp.1448-1461,
    17. The problem in total joint arthropalsty: Aseptic loosening [Editorial] , S.R. Goldring;C.R. Clark;T.M. Wright , J. Bone Joint Surg. / v.75A,pp.799-801,
    18. Orientation softening in the deformation and wear of ultra-high molecular weight polyethylene , A. Wang;D.C. Sun;S.S. Yau;B. Edwards;M. Sokol;A. Essner;V.K. Polineni;C. Stark;J.H. Dumbleton , Wear / v.203-204,pp.230-241,

 저자의 다른 논문

  • 이권용 (14)

    1. 2002 "접촉 형상과 기구학적 운동형태가 초고분자량 폴리에틸렌의 마멸에 미치는 영향" 윤활학회지 = Journal of the Korean Society of Tribologists and Lubrication Engineers 18 (2): 143~146    
    2. 2003 "저작재현장치의 개발" 大韓齒科保存學會誌 = Journal of Korean Academy of Operative Dentistry 28 (1): 34~40    
    3. 2003 "대퇴골 전자간 골절의 새로운 수술기법에 관한 생체역학적 분석" 의공학회지 = Journal of biomedical engineering research 24 (5): 401~410    
    4. 2004 "의료영상 분석과 유한요소법을 통한 추체 성형술의 다양한 인자들에 대한 생체 역학적 효과 분석" 의공학회지 = Journal of biomedical engineering research 25 (3): 171~182    
    5. 2005 "Halogen Light Curing Unit과 Light Emitting Diodes Curing Unit을 이용하여 중합되어진 복합레진의 마멸 특성 비교" 윤활학회지 = Journal of the Korean Society of Tribologists and Lubrication Engineers 21 (6): 268~271    
    6. 2005 "인공 고관절 골두용 세라믹 복합재료에 대한 세라믹-세라믹 접촉 마멸 특성 분석" 윤활학회지 = Journal of the Korean Society of Tribologists and Lubrication Engineers 21 (5): 216~220    
    7. 2005 "연골세포 부착력 평가" 윤활학회지 = Journal of the Korean Society of Tribologists and Lubrication Engineers 21 (5): 236~240    
    8. 2006 "요추부 협착증 치료를 위한 극돌기 삽입술의 생체역학적 효과 분석" Journal of biomedical engineering research : the official journal of the Korean Society of Medical & Biological Engineering 27 (5): 210~217    
    9. 2010 "감마선 조사 방법에 따른 정형외과용 초고분자량 폴리에틸렌의 미세구조 변화" 폴리머 = Polymer (Korea) 34 (5): 454~458    
    10. 2012 "외상성 관절염 진행에 따른 경골 골단 해면골에서의 골 미세구조 변화 패턴 추적 관찰" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B 36 (11): 1081~1090    
  • 김석영 (16)

  • Kim, Shin-Yoon (10)

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
유료다운로드

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 출판된 논문 + 더보기