본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

상악중절치에서 전부도재관의 finish line형태에 따른 파절강도와 응력 분포에 관한 연구
THE FRACTURE RESISTANCE AND STRESS DISTRIBUTION OF ALL CERAMIC CROWNS WITH TWO TYPES OF FINISH LINE ON MAXILLARY CENTRAL INCISOR

기태석   (원광대학교 치과대학 치과보철학교실UU0001021  ); 김계순   (원광대학교 치과대학 치과보철학교실UU0001021  ); 이진한   (원광대학교 치과대학 치과보철학교실UU0001021  ); 김유리   (원광대학교 치과대학 치과보철학교실UU0001021  ); 동진근   (원광대학교 치과대학 치과보철학교실UU0001021  );
  • 초록

    Purpose : The purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown. and 0.5mm width chamfer finish lines on the maxillary central incisor. Material and method : After 15 metal dies were made for each group, the IPS Empress all ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the metal die. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co. Germany)was used to measure the fracture strength with loading on the incisal edge. And also, three-dimensional finite element stress analysis was used to measure the stress distribution with the various types of the finish lines(1.0mm width rounded shoulder, 0.5mm width chamfer), the loading site(incisal edge, incisal $\frac{1}{3}$ ) and the type of loading(concentration loading, distribution loading). Results and conclusion : 1. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(876N) and the mean fracture strength of chamfer(882N) did not skew any significant difference between each other(p>0.05). 2. The stress distribution of all ceramic crown in three dimensional finite element analysis showed concentration aspect at loading point and cervical area or labial surface. 3. In metal die, there were no differences in stress distribution between finish lines, but in natural teeth model, chamfer finish line showed higher stress than rounded shoulder finish line. 4. When force was loaded on the incisal edge the stress was concentrated on the incisal edge and the cervical area of labial surface. When force was loaded on the incisal $\frac{1}{3}$ , the stress concentrated on the cervical area of labial surface and the cingulum area. 5. Generally, natural teeth model showed higher and various stress than the metal die.


  • 주제어

    All ceramic crown .   Fracture resistance .   Finish line.  

  • 참고문헌 (73)

    1. Southan DE, Jorgensen KD. Faulty porcelain jacket crowns. Aust Dent J 1973:18:152-156 
    2. Probster L. Compressive strength of two modern all-ceramic crowns. J Prosthodont 1992;5:409-414 
    3. Claus H. Das Hi-Ceram Verfahren metallfreie Kronen auf einem Keramikgerust. Dent Labor 1987;35:479 
    4. Beham G. IPS-Empress:A new ceramic technology. Ivoclar-Vivadent report 1990;6:1-13 
    5. Kelly JR, Giordano R. Pober R. Cima MJ. Fracture surface analysis of dental ceramics clinically failed restorations. Int J Prosthodont 1990;3:430-440 
    6. Friedlander LD, Munoz CA, Goodacre CJ, Doyle MG, Moor BK. The effect of tooth preparation design on breaking strength of Dicor crowns: Part 1. Int J Prosthodont 1990;3:159-168 
    7. Yoshinari M, Derand T. Fracture strength of all-ceramic crowns. Int J Prosthodont 1994;7:329-338 
    8. Malament KA, Grossman DG. The cast glass-ceramic restoration. J Prosthet Dent 1987;57:674-685 
    9. Ryden H. The laser beams for measuring tooth mobility and tooth movement. J Periodontol 1979;45:283-287 
    10. Park CK, Lee SH, Chung HY, Jang JH. A study on the stress distribution of cantilever bridge under maximum bite force and functional bite force using three dimensional finite element method. J Korean Acad Prosthodont 1994;32:484-500 
    11. Choi SY, Lee SH, Yang JH, Chung HY. A study on stress distribution of endodontically treated tooth according to the various post length using three dimensional finite element method. J Korean Acad Prosthodont 1995;33:177-197 
    12. Anusavice KJ, Hojjatie B. Influence of incisal length of ceramic and loading orientation on stress distribution in ceramic crown. J Dent Res 1988;67:1371-1375 
    13. Hojjatie B, Anusavice KJ. Three dimentional finite element analysis of glass-ceramic dental crowns. J Biomechanics 1990;23:1157-1166 
    14. Derand T. Stress analysis of cemented or resin-bonded loaded porcelain inlay. Dent. Mater 1991;7:21-24 
    15. Sozio RB, Riley EJ. Shrink free ceramic. Dent Clin North Am 1985;29:705-717 
    16. Davis DR. Comparison of fit of two types of all-ceramic crowns. J Prosthet Dent 1988;59:12 
    17. Bernal G, Jones RM, Brown DT, Munoz CA, Goodacre CJ. The effect of finish line form and luting agent on the breaking strength of Dicor crowns. Int J Prosthodont 1993;6:286-290 
    18. Duffin JL, Bales DJ, Johnson GH. Fracture resistance of castable ceramic crowns (abstract). J Dent Res 1989;68:235 
    19. Kawamura Y. Oral physiology. Kyoto, Japan, Nagamatsu Shoten, 1966;212-227 
    20. Korber KH, Ludwig K. Maximale Kaukraft als Berechnungsfaktor zahntechnischer Konstruktionen. Dent Labor 1983;31:55-60 
    21. Ringquist M. Isometric bite force and its relationship to dimensions of the facial skeleton. Acta Odonto Scand 1973;31:35 
    22. Anusavice KJ. Degradability of dental ceramics. Adv Dent Res 1992;6:82-9 
    23. Grey NJA. Piddock V, Wilson MA. In vitro comparison of conventional crowns and a new all-ceramic system. J Dent 1993;21:47-51 
    24. Dicor: Clinical Procedures Manual, Dentply, 1984 
    25. Anusavice KJ, Hojjatie B. Stress distribution in metal-ceramic crowwith a facial porcelain margin. J Dent Res 1987;66:1493-1498 
    26. Adair PJ, Grossman DG. The castable ceramic crown. Int J Periodont Rest Dent 1984;2:32-45 
    27. Dickinson AJG, Moore BK. Harris RK. Dykema RW. A comparative study of the strength of aluminous porcelain and all-ceramic crowns. J Prosthet Dent 1989;61:297 
    28. Edelhoff D, Sorensen JA. Tooth structure removal associated with various preparation design for anterior teeth. J Prosthet Dent 2002;87:503-509 
    29. Crothers AJR, Wassell RW, Allen R. The resin-bonded porcelain crown: A rationale for use on anterior teeth. Dental update 1993;Nov;388-395 
    30. Mcinnes-Ledoux PM, LedouxWR, Weinberg R, Pappold A. Luting castable ceramic restorations- a bond strength study J Dent Res 1987;66:245. abstr No. 802 
    31. Dicor laboratory manual. Dentsply Int., York., PA, 1987 
    32. Young TM, Altschuler BR. Laser holography in dentistry. J Prosthet Dent 1977;38:216 
    33. Lee KY, Chang IT. Three dimensional finite element analysis of the effects of alveolar bone loss on stress distribution in post reconstruction teeth. J Korean Acad Prosthodont 1997;35:674-688 
    34. Deboever JA, McCall WD, Holden S, Ash MM. Functional occlusal forces : An investigation by telemetry. J Prosthet Dent 1978:40:326-333 
    35. Rubin C, Krishnamurthy N, Capilouto E. Yi H. Stress analysis of the human tooth using a three dimentional finite element model. J Dent Res 1983;62:82-86 
    36. Vahidi F, Egloff ET, Panno FV. Evaluation of marginal adaptation of all ceramic crowns and metal ceramic crowns. J Prosthet Dent 1991;66:426 
    37. Hsu CS, Stangel I, Nathanson D. Shear bond strength of resin to etched porcelain J Dent Res 1985;64:296 
    38. Friedlander LD, Munoz CA, Goodacre CJ, Doyle MG, Moore BK. The effect of tooth preparation design on the breaking strength of Dicor crowns. Int J Prosthodont 1993;3:159-168 
    39. Lee SW, Lee SH, Yang JH, Chung HY. The effect of surface treatment on fracture strength of dental ceramics. J Korean Acad Prosthodont 1999;37:658-669 
    40. Chan C, Weber H. Plaque retention on teeth restored with full-ceramic crowns: A comparative study. J Prosthet Dent 1986;56:666-71 
    41. Josephson BA, Schulman A, Dunn ZA, Hurwitz W. A compressive strength study of complete ceramic crowns, Part II. J Prosthet Dent 1991;65:388-391 
    42. Optec HSP laboratory technique manual. Jeneric/Pentron Inc, Wallingford, Conn, January, 1988 
    43. Argue JE. The preparation of teeth for porcelain jacket crown. J Am Dent Assoc 1988;67:1259-1270 
    44. Dykema RW, Goodacre CJ, Phillips RW. Johnston's modern practice in fixed prosthodontics. 4th ed., W.B.Saunders Co.. 1986 
    45. Futterknecht N, Jinoian V. A Renaissance of ceramic prosthetics?, QDT 1992;15:65-78 
    46. Hills A. All-ceramic restorations with the In-Ceram system: 6 years of clinical experience. Vita, 1995 
    47. Fairly JM. Preparation of a maxillary central incisor for porcelain jacket preparation. Br Dent J 1958;18:208 
    48. Scherrer SS, Rijk WG. Factors in the fracture resistance of posterior all ceramic crowns. J Dent Res 1991;70:434 
    49. Hobo S, Iwata T. Castable apatite ceramics as a new biocompatible restorative material. I. Theoretical considerations. Quintessence Int 1985;16:451-458 
    50. Dunne SM, Millar J. A longitudinal studyof the clinical performance of porcelain veneer. Br Dent J 1993;175:317-321 
    51. Oppice HW. A resume of ideas on porcelain jacket crown preparation, J Am Dent Assoc 1934;21:1030-1039 
    52. Chai JY, Steege JW. Effect of labial margin design on stress distribution of a porcelain fused to metal crown. J Prosthodont 1992;1:18-23 
    53. IPS-Empress manual. Ivoclar, Schann, Liechtenstein 
    54. Ching CL, O' Brien WJ. Strength of magnesia-core crown with different body porcelain. Int J Prosthodont 1993;6:60-64 
    55. Schwickerrath H. Die In-Ceram Aluminiumoxid- Keramik ein innovativer dentalkelamischer Werkstoff. Dent Labor 1989;37:1597 
    56. Wal JG, Reisbick MH. Johnston WM. .Incisal-edge strength of porcelain laminate veneers restoring mandibular incisors. Int J Prostohodont 1992;5:441-446 
    57. Farah JW, Craig RG. Distribution of stresses in porcelain-fused-to-metal and porcelain jacket crowns. J Dent Res 1974;54:255-261 
    58. Peyton FA, Mahler DB, Hershenov B. Physical properties of dentin. J Dent Res 1952;31:369-370 
    59. Calamia JR. Clinical evaluation of etched porcelain veneers. Am J Dent 1989;2:915 
    60. Ramfjord S. Ash MM. Occlusion. Third ed. W.B. Saunders Co. 1983 
    61. Kern M. Doglas WH, Fechtig T. Strub JR. Delong R. Fracture strength of all-porcelain. Resin bonded bridges after testing in an artificial oral environment. J Dent 1993;21:117-121 
    62. Derand T. Effect of variation in the shape of the core on stresses in a loaded model of a porcelain crown. Odontol Rev 1974;25:11-26 
    63. Kim HS, Ju TH, Oh SC, Dong JK. A Study on the fracture strength of the lPS-Empress ceramic crown according to margin type. J Korean Acad Prosthodont 1997;35:296-307 
    64. Seghi RR, Denry IL, Rosential SF. Relative fracture toughness and hardness of new dental ceramics. J Dent Prosthet 1995;74:145-150 
    65. Pettrow JN. Practical factors in building and firing characteristics of dental porcelain. J Prosthet Dent 1961;11:334 
    66. Walls AWG. The use of adhesively retainded all-porcelain veneer during the management of fractured and worn anterior teeth. part II. clinical results after 5 years follow-up. Br Dent J 1995;178:337-339 
    67. Machert JR Jr, Russel C. Leucite crystallization of a heat-pressed dental ceramic. Int J Prosthodont 1996;9:261 
    68. Walton CB, Leven MM. A preliminery report of photoelastic tests of strain pat- terns whit in jacket crowns. J Am Dent Assoc 1955;50:44-48 
    69. Doyle MG, Goodacre CJ, Andres CJ. The effect of tooth preparation design on the breaking strength of Dicor crown: Part 3. Int J Prosthodont 1990;3:327-340 
    70. Rosenstiel SF, Land MF, Fujimoto M.:Contemporary fixed prosthodontics. 3rd ed., Mosby Co., 2001 
    71. Browning JD, Meador LW, Eick JD. :Movement of three removable partial denture clasp assemblies under occlusal loading. J Prosthet Dent 1986;55:69-74 
    72. Sjogren G, Bergman M. Relationship between comparessive strength and cervical shaping of the all-ceramic Cerestore crown. Swed Dent J 1987;11:147-150 
    73. Jensen ME, Sheth JJ, Tolliver D. Etchedporcelain resin-bonded full-veneer crowns: in vitro fracture resistance. Compend Contin Educ Dent 1989;6:336-346 

 저자의 다른 논문

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
유료다운로드
  • 원문이 없습니다.

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 출판된 논문 + 더보기