본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

한국주조공학회지 = Journal of Korea Foundry Society v.25 no.6, 2005년, pp.240 - 248  
본 등재정보는 저널의 등재정보를 참고하여 보여주는 베타서비스로 정확한 논문의 등재여부는 등재기관에 확인하시기 바랍니다.

반고상 A356 합금 슬러리의 미세조직에 따른 유동특성에 관한 연구
Effects of Microstructure Morphology on Fluid Flow Characteristics of A356 Commercial Alloy in Semi-Solid Slurry

김재민   (연세대학교 금속시스템공학과 재료공정 모델링 연구실UU0000936  ); 이승훈   (연세대학교 금속시스템공학과 재료공정 모델링 연구실UU0000936  ); 홍준표   (연세대학교 금속시스템공학과 재료공정 모델링 연구실UU0000936  );
  • 초록

    The rheocasting characteristics are strongly influenced by the microstructural morphology such as particle size, form factor and contiguity. In this study, the effect of structural morphology on fluid flow characteristics of A356 semi-solid alloy was investigated with a vacuum suction fluidity test. Semi-solid metal slurry was made by the mechanical stirring, the liquidus casting, and H-NCM to be analysed. H-NCM could obtain uniform and fine globular microstructures of 0.9 form factor and 55 ${\mu}m$ particle size. Inoculation was found to be effective for reducing particle size, however, for H-NCM it should be avoided due to the cause of increasing contiguity. The fluidity test indicated that the non-stirring method had higher fluidity and smaller liquid segregation in the same solid faction of 0.4 than the stirring method, for smaller particle size and higher form factor. It was observed that liquid segregation decreased as the particle size is smaller and form factor is higher. The results of die-casting experiment were a good agreement with those of fluidity test.


  • 주제어

    Semi-Solid process .   H-NCM .   Globular structure .   Inoculation .   Vacuum suction test .   Die-casting .   Liquid segregation.  

  • 참고문헌 (19)

    1. R. Mehrabian and M. C. Flemings: Trans. AFS, 'Die casting of partially solidification Al-alloys', 80 (1972) 173-182 
    2. M. Perez, J. C. Barbe, Z. Neda, Y. Brechet, and L. Salvo: Acta Mater., 'Computer simulation of the microstructure and rheology of semi-solid alloys under shear', 48 (2000) 3773-3782 
    3. A. N. Alexandrou, P. L. Menn, G. Georgiou, and V. Entov: J. Non-Newtonain Fluid Mech., 'Flow insatabilities in Herschel-Bulkley Fluids', 116 (2003) 19-32 
    4. V. Laxmanan, R. N. Smith, and M. E. Glickman: Metall. Trans., 'Deformation of semi-solid Sn-15Pb metal alloy', 11A (1980) 1927-1937 
    5. W. Kurz and D. J. Fisher: 'Fundermantals of solidification', 3th edn., Trans Tech Publications (1989) 45-51 
    6. S. Hiratsuka, E. Niyama, T. Funakubo, and K. Anzai: Trans Jpn. Foundrymen's Soc., 'Effects of mold coating and mold atmosphere on the fluidity of an aluminum alloy', 13 (1994) 18-24 
    7. E. Niyama, K. Anzari, S. Hiratsuka, and T. Funakubo: J. Mater. Proc.Tech., 'Some basic research for thin-wall casting technology', 63 (1997) 779-783 
    8. W. M. Mullins and R. F. Sekerka: J. Appl. Phys., 'Morphological stability of a particle growing by diffusion and heat flow', 34 (1963) 323-329 
    9. J. Gurland, Trans. AIME, 'The measurement of grain contiguity in two-phase alloys', 212 (1958) 452-459 
    10. C. L. Martin, D. Favier, and M. Suery: Int. J. Plast., 'Visco-plastic behavior of porous metallic materials saturated with liquid part I: Constitutive equations', 13 (1997) 215-235 
    11. M. C. Flemings: Metall. Trans., 'Behavior of metal alloys in the semi-solid state', 22B (1991) 269-293 
    12. M. Suery and A. Zavaliangos: Proc. 6th Int. Conf. on 'Semisolid processing of alloys and composites', 'Key problems in rheology of semi-solid alloys', Turin, Italy, (2000) 129-135 
    13. P. Kumar, C. L. Martin, and S. Brown: Proc. 3rd Int. Conf. on 'Semisolid processing of alloys and composites', ' Constitutive modeling and characterization of the flow behavior of semi-solid metal alloy slurries', (1994) 37-46 
    14. J. Koke and M. Modigell: J. of Non-Newtonian Fluid Mechanics, 'Flow behavior of semi-solid metal alloys', 112 (2003) 141-160 
    15. M. Suery and M. C. Flemings: Metall. Trans., 'Effect of strain rate on deformation behavior on semi-solid dendritic alloys', 13A (1982) 1809-1819 
    16. D. Brabazon, D. J. Browne, and A. J Carr: Mater. Sci. Eng., 'Ex-perimental investigation of the transient and steady rheological behavior of Al-Si alloys in the mushy state', A356 (2003) 69-80 
    17. M. Modigell and J. Koke: J. of Mater. Proc. Tech., 'Rheological modelling on semi-solid metal alloys and simulation of thixocasting process', 111 (2001) 53-58 
    18. A. Zavaliangos and A. Lawley: J. Mater. Eng. Perform., 'A numerical simulation of thixoforming', 4 (1995) 40-47 
    19. P. A. Joly and R. Mehrabian: J. of Mat. Sci., 'The rheology of a partially solid ', 11 (1976) 1393-1418 

 저자의 다른 논문

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
  • NDSL :
유료다운로드

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 이용한 콘텐츠
이 논문과 함께 출판된 논문 + 더보기