본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

CAM Zirconia 완전도재 구조물의 정밀 적합도에 관한 연구
A STUDY OF PRECISE FIT OF THE CAM ZIRCONIA ALL-CERAMIC FRAMEWORK

전미현   (부산대학교 치과대학 치과보철학교실UU0000613  ); 전영찬   (부산대학교 치과대학 치과보철학교실UU0000613  ); 정창모   (부산대학교 치과대학 치과보철학교실UU0000613  ); 임장섭   (부산대학교 치과대학 치과보철학교실UU0000613  ); 정희찬   (부산대학교 치과대학 치과보철학교실UU0000613  );
  • 초록

    State of problem: Zirconia all-ceramic restoration fabricated with CAM system is on an increasing trend in dentistry. However, evaluation of the marginal and internal fits of zirconia bridge seldomly have been reported. Purpose: This study was to evaluate the at of margin and internal surface in posterior 3-unit zirconia bridge framework fabricated with CAM system(DeguDent, Germany). Material and Method: Preparations of secondary premolar and secondary molar on artificial resin model were performed for fabrication of 3-unit posterior bridge framework. Fits of 5 zirconia bridge framework were compared with 5 precious ceramo-metal alloy framework(V-GnathosPlus, Metalor, Switzerland), and prepared margins were designed to chamfer and shoulder finishing line. Each framework was cemented to epoxy resin model with reinforced glass ionomer(FujiCEM, GC Co., Japan), embedded in acrylic resin and sectioned in two planes, mesio-distal and buccolingual. Samples were divided into six pieces by sectioning and had two pieces of each surface(i.e mesial, distal, buccal and lingual surface) per abutment, so there were eight measuring points in each abutment. External gap was measured at the margin and internal gaps were measured at the margin, axial and occlusal surface. Gaps were observed under the measuring microscope(Compact measuring microscope STM5; Olympus, Japan) at a magnification of $\times100$ . T-test were used to determine the statistic significance of the different gaps between zirconia and metal framework. Results and Conclusion: 1. External and internal marginal gaps of zirconia and metal framework were in clinically acceptable range. External marginal gaps were not different significantly between zirconia $(81.9{\mu}m)$ and metal $(81.3{\mu}m)$ framework and internal marginal gaps of zirconia $(44.6{\mu}m)$ were smaller than those of metal framework $(58.6{\mu}m)$ . 2. Internal axial gaps of zirconia framework $(96.7{\mu}m)$ were larger than those of metal frame-work $(78.1{\mu}m)$ significantly and adversely, internal occlusal gaps of zirconia frame-work $(89.4{\mu}m)$ were smaller than those of metal framework $(104.9{\mu}m)$ significantly. 3. There were no significant differences in external and internal marginal gaps between chamfer and shoulder finish line when zirconia frameworks were fabricated.


  • 주제어

    Zirconia .   CAM .   External marginal gap .   Internal marginal gap.  

  • 참고문헌 (30)

    1. Filser F. All ceramic dental bridges by Direct Ceramic Machining(DCM). Materials in Medicine, Materials Day, Department of Materials, Eds. M.O. Speidel, P.J. Uggowitzer, vdf Hochschulverlag AG, ETH Zurich. Zurich. 1998;May:165-89 
    2. Kim CH, Jeon YC, Jeong CM, Lim JS. Effect of surface treatments of zirconia ceramic on the bond strength of resin cements. J Kor Acad Prosthodont 2004;42: 386-96 
    3. Nakamura T, Dei N, Kojima T, Wakabayashi K. Marginal and Internal Fit of Cerec3 CAD/CAM All-Ceramic Crowns. Int J Prosthodont 2003;16:244-8 
    4. Rinke S. Marginal Accuracy and Fracture Strength of Conventional and Copy-Milled All-Ceramic Crowns. Int J Prosthodont 1995;8(4):303-10 
    5. Chan C, Haraszthy G, Geis-Gerstorfer J, Weber H, Huettemann H. Scanning electron microscopic studies of the marginal fit of three esthetic crowns. Quintess Int 1989;20:189-93 
    6. Dedmon HW. Disparity in expert opinion on size of acceptable margin openings. Oper Dent 1982;7:97-101 
    7. McLean JW, Fraunhofer JA. Estimation of cement film thickness by an in vivo technique. Br Dent J 1971;131:107-11 
    8. Sye, J, Byrne G. Influence of Finish-Line Geometry on the Fit of Crowns. Int J Prosthodont 1993;6:25-30 
    9. Kalsson S. A clinical evaluation of fixed bridges, 10years following insertion. J Oral Rehabil 1986;13:423-32 
    10. Reports of councils and bureaus. Revised American National Standards Institute/American Dental Association Specification No.8 for zinc phosp-hate cement. JADA 1978;96:121-3 
    11. Pascoe DF. Analysis of the geometry of finishing lines for full crown restorations. J Prosthet Dent 1978;40:157-62 
    12. Nakamura T, Nonaka M, Maruyama T. In Vitro Fitting Accuracy of Copy-Milled Alumina Cores and All-Ceramic Crowns. lnt J Prosthodont 2000;13:189-93 
    13. Shimizu K, Oka M, Kumar P, Kotoura Y, Yamamuro T, Makinouchi K, Nakmura R. Time-dependent changes in the mechanical properties of zirconia ceramic. J Biomed Mater Res 1993;27:729-34 
    14. Sorensen JA. A standardized method for determination of crown margin fidelity. J Prosthet Dent 1990;64:18-24 
    15. Koo JY, Lim JH, Cho IH. Marginal fidelity according to the margin types of all ceramic crowns. J Kor Acad Prosthodont 1997;35:445-7 
    16. May KB, Russell MM, Razzoog ME, Lang BR. Precision of fit : The Procera AlICeram crown. J Prosthet Dent 1998;80:394-404 
    17. Rinke S. Fitting accuracy of FPDs produced by a CAD/CAM system for the production of metal copings for porcelain-fused-to-metal restorati-ons. J Dent Res 1996;75:138 
    18. Bergenholtz G, Cox CF. Bacterial leakage around dental restorations; its effect on the dental pulp. J Oral Pathol 1982;11:439-50 
    19. Small BW. Product review: All-ceramic system. General Dent 1998;446-8 
    20. Seong JY, Jeon YC, Jeong CM, Lim JS. The fit of zirconia core fabricated with CAD/CAM system. J Kor Acad Prosthodont 2004;42:489-500 
    21. Christel. P, Meunier A, Heller M. Mechanical properties and short-term invivo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res 1989;23:45-61 
    22. Rosenblum M. A review of All-Ceramic Restorations. JADA 1997;128:297-307 
    23. Campbell SD, Sozio RB. Evaluation of the fit and strength of an all - ceramic fixed partial denture. J Prosthet Dent 1988;59:301-6 
    24. Pera P, Bassi F, Carossa S. In vitro marginal adaptation of alumina porcelain ceramic crown. J Prosthet Dent 1994;72:585-90 
    25. Willer J. Computer-assisted milling of dental restorations using a new CAD/CAM data acqusition system. J Prosthet Dent 1998;80:346-53 
    26. Boening KW, Wolf BH. Clinical fit of Procera AllCeram crowns. J Prosthet Dent 2000;84:419-24 
    27. Wassell RW. Crowns and extra-coronal restorations: Materials selection. British Dental Journal 2002;192:199-211 
    28. Tinschert J, Natt G, Mautsch W, Spiekermann H, Anusavice KJ. Margi-nal Fit of Alumina and Zirconia-Based Fixed Partial Dentures Produced by a CAD/CAM System. Oper Dent 2001;26:367-74 
    29. Grey N, Piddock V, Wilson M. In vitro comparison of conventional and a new all-ceramic system. J Dent 1993;21:47-51 
    30. McLean JW. Evolution of dental ceramics in the twentieth century. J Prosthet Dent 2001;85:61-6 
  • 이 논문을 인용한 문헌 (5)

    1. Kwon, Yong-Joong ; Lee, Young-Soo ; Park, Won-Hee 2008. "Comparative study in marginal adaptation of zirconia cores fabricated with 3 different CAD/CAM systems" 대한치과보철학회지 = The journal of Korean academy of prosthodontics, 46(1): 12~21     
    2. Shin, Eon-Sick ; Lee, Young-Soo ; Park, Won-Hee 2008. "Comparative study in fracture strength of zirconia cores fabricated with three different CAD/CAM systems" 대한치과보철학회지 = The journal of Korean academy of prosthodontics, 46(1): 22~30     
    3. Huh, Jung-Bo ; Park, Cheong-Gil ; Kim, Ha-Young ; Park, Chan-Kyung ; Shin, Sang-Wan 2010. "Evaluation using Replica Technique on the marginal and internal fitness of zirconia cores by several CAD/CAM systems" 대한치과보철학회지 = The journal of Korean academy of prosthodontics, 48(2): 135~142     
    4. Jo, Jun-Ho ; Seo, Jeong-Il ; Bae, Won-Tae 2014. "The Effects of Sintering Temperature Influence on the Mechanical Property and Microstructure of Dental Zirconia Block" 대한치과기공학회지 = The Journal of Korean academy of dental technology, 36(1): 9~15     
    5. Kim, Ki-Baek ; Kim, Seok-Hwan ; Kim, Jae-Hong 2015. "Marginal Adaptation of Zirconium Dioxide Core according to the Abutment Teeth" 치위생과학회지= Journal of dental hygiene science, 15(1): 54~59     

 저자의 다른 논문

  • 전미현 (1)

    1. 2008 "임플란트 고정체-지대주 연결부 및 지대주 디자인이 기계적 강도에 미치는 영향" 대한치과턱관절기능교합학회지 = Journal of Korean academy of stomatognathic function and occlusion 24 (3): 269~281    
  • 전영찬 (100)

  • 정창모 (114)

  • 임장섭 (27)

  • 정희찬 (11)

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
유료다운로드
  • 원문이 없습니다.

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 이용한 콘텐츠
이 논문과 함께 출판된 논문 + 더보기