본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

화염의 상호작용에 의한 부분 예혼합화염의 화염날림 유속 확대
Nozzle Configurations for Partially Premixed Interacting Jet Flame to Enhance Blowout Limits

김진현   (영남대학교 대학원 기계공학부UU0000951  ); 이병준   (영남대학교 기계공학부UU0000951  );
  • 초록

    For the non-premixed interacting jet flames, it has been reported that if eight small nozzles are arranged along the circle of $40{\sim}72$ times the diameter of single jet, the flames are not extinguished even in 200m/s. In this research, experiments were extended to the partially premixed cases to reduce both flame temperature and NOx emission. Nine nozzles were used- eight was evenly located along the perimeter of the imaginary circle and one at the geometric centre. The space between nozzles, S, the equivalence ratio, ${\phi}$ , the exit velocity and the role of the jet from the centre nozzle were considered. Normally, flame was lifted and flame base was located inside the imaginary circle made by the nozzle. As nozzles went away from each other, blowout velocity increased and then decreased. The maximum blowout velocity diminished with the addition of air to the fuel stream. When the fuel and/or oxidizer were not fed through the centre nozzle, the maximum blowout velocity obtained by varying S and ${\phi}$ was around 160m/s. Optimum nozzle separation distance at which peak blowout velocity obtained also decreased with ${\phi}$ decrease. Flame base became leaner as approaching to the blowout. It seemed that lots of air was supplied to the flame stabilizing region by the entrainment and partially premixing. To approve this idea and to enhance the blowout velocity, fuel was supplied to the centre region. With the small amount of fuel through the centre nozzle, partially premixed flame could be sustained till sonic velocities. It seemed that the stabilizing mechanism in partially premixed interacting flame was different from that of non-premixed case because one was stabilized by the fuel supply through the centre nozzle but the other destabilized.


  • 주제어

    화염날림 .   화염의 상호작용 .   화염 안정성 .   부분 예혼합화염.  

  • 참고문헌 (9)

    1. Roper, F. G., 1977, 'The Prediction of Laminar Jet Diffusion Flame Size: Part 1. Theoretical Model,' Combust. Flame, Vol. 29, pp. 219-226 
    2. Turns, S. R., 1996, An introduction to combustion, McGraw Hill, 2ed. 
    3. Broadwell, J. E., Dahm, W. J. and Mungal, M. G., 1984, 'Blowout of Turbulent Diffusion Flames,' Twenties Symposium (International) on Combustion, The Combustion Institute, pp. 303-310.3 
    4. Kim, H. Y., Chun, C. K., 1991, 'The Interaction of Gaseous Diffusion Flames,' Trans. of the KSME, Vol. 15, No.1, pp. 355-365     
    5. Chun, C. K., 1993, 'Production of NO in Interacting Laminar Diffusion Flames,' Trans. of the KSME, Vol. 17, No.1, pp. 190-199     
    6. Menon, R. and Gollahalli, S. R., 1985, 'Multiple Jet Gas Flames in Still Air,' In Heat Transfer in Fire and Combustion Systems, ASME poblication HTD, Vol. 45, pp. 127-136 
    7. Menon, R. and Gollahalli, S. R., 1988, 'Combustion Characteristics of Interaction Multiple Jets in Cross Flow,' Combustion. Science and Technology, Vol. 60, pp. 375-389 
    8. Lee, S. and Lee, B. J., 2001, 'Characteristics of Interacting Lifted Flames,' Trans. of the KSME(B), Vol. 25, No.4, pp. 461-466     
    9. Kim, J. S. and Lee, B. J., 2003, 'Stability Enhancement by the Interaction of Diffusion Flames,' Trans. of the KSME(B), Vol. 27, NO. 5, pp. 1420-1426     
  • 이 논문을 인용한 문헌 (4)

    1. Kim Jin Hyun ; Lee Byeong-Jun 2005. "Effect of Flame Interaction on the NO Emission" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, 29(6): 730~736     
    2. Kim Jin Hyun ; Lee Byeong-Jun 2005. "Characteristics of Methane Non-Premixed Multiple Jet Flames" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, 29(3): 349~355     
    3. Lee, Byeong-Jun ; Park, Kyung-Wook 2008. "Effect of Lean-rich Fuel Staging to the Multiple Jet Flames on the Blowout Velocity" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, 32(1): 7~14     
    4. Lee, Byeong Jun ; Bae, Chul Han 2014. "Combustion Characteristics of the SOFC Products for SOFC/Gas Turbine Hybrid Power Generation System" 한국연소학회지 = Journal of the Korean Society of Combustion, 19(3): 44~52     

 저자의 다른 논문

  • 이병준 (11)

    1. 1997 "평면 레이저유도 형광법을 이용한 부상화염의 특성 연구" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B 21 (11): 1393~1402    
    2. 1998 "가스터빈 연소기의 화염 불안정성에 관한 연구" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B 22 (7): 1022~1029    
    3. 2000 "레이저 유도 백열법을 이용한 화염 내부 매연 농도 측정" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B 24 (5): 725~732    
    4. 2002 "덤프형 가스터빈 연소기에서의 화염 불안정성의 사전 감지 인자" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B 26 (5): 750~756    
    5. 2002 "산소부화와 희석제에 따른 비예혼합 화염의 안정성" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B 26 (10): 1458~1464    
    6. 2003 "다수 비예혼합 화염의 안정화 특성" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B 27 (10): 1420~1426    
    7. 2005 "다수 상호작용 화염의 공해배출물 특성" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B 29 (6): 730~736    
    8. 2005 "메탄 비예혼합 상호작용 화염의 특성" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B 29 (3): 349~355    
    9. 2009 "스월이 부분예혼합 상호작용화염의 화염날림 유속에 미치는 영향" 한국연소학회지 = Journal of the Korean Society of Combustion 14 (2): 26~31    
    10. 2010 "전자 소자를 이용한 연소열 측정" 한국연소학회지 = Journal of the Korean Society of Combustion 15 (3): 40~47    

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
유료다운로드

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 출판된 논문 + 더보기