본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

The Designing of an Air-gap Type FBAR Filter using Leach Equivalent Model

Choi, Hyung-Wook   (Department of Electrical and Information Engineering, Kyungwon UniversityUU0000122  ); Jung, Joong-Yeon   (Department of Electrical and Information Engineering, Kyungwon UniversityUU0000122  ); Lee, Seung-Kyu   (Department of Electrical and Information Engineering, Kyungwon UniversityUU0000122  ); Park, Yong-Seo   (Department of Electrical and Information Engineering, Kyungwon UniversityUU0000122  ); Kim, Kyung-Hwan   (Department of Electrical and Information Engineering, Kyungwon UniversityUU0000122  ); Shin, Hyun-Yong   (Department of Electronics and Information Communication Engineering, Namseoul UniversityUU0000327  );
  • 초록

    An air-gap type FBAR was designed using Leach equivalent model for analyzing a vertical structure of the FBAR. For the top electrode, Pt, and the bottom electrode, Au, of $1.2{\mu}m$ thickness and the piezoelectric of 0.8,urn thickness, the resonance and anti-resonance occurred at 2.401 GHz and 2.460 GHz, respectively. $S_{11}$ was increased and $S_{21}$ was decreased as the resonance area of FBAR was widened. We observed the characteristics of insertion loss, bandwidth and out-of-band rejection of ladder-type FBAR BPF by changing resonance areas of series and shunt resonators and by adding stages. As the resonance area of series resonator was increased, insertion loss was improved but out-of-band rejection was degraded. And as the resonance area of shunt resonator was increased, insertion loss was degraded a little but out-of-band rejection was improved even without adding stages. We, also, changed the shape of the resonance area from square shape to rectangle shape to examine the effects of the resonator shape on the characteristics of the BPF. The best performances were observed when the sizes of series and shunt resonator are $150{\mu}m{\times}l50{\mu}m\;and\;5{\mu}m{\times}50{\mu}m$ , respectively. Out-of-band rejection was improved about 10dB and bandwidth was broadened from 30MHz to 100MHz utilizing inductor tuning on $2{\times}2\;and\; 4{\times}2$ ladder-type BPFs.


  • 주제어

    FBAR .   Leach equivalent model .   BPF .   Resonance.  

  • 참고문헌 (11)

    1. 'IEEE STD 802.11g/D1.1', Supplement to ANSI/ IEEE Std 802.11, 1999 Edition, 2002 
    2. R. Ruby and P. Merchant, 'Micromachined thin film bulk acoustic resonators', IEEE International Frequency Control Symposium, p. 135, 1994 
    3. G. R. Kline, K. M. Lakin, and R. S. Ketcham, 'Thin film resonator(TFR) low insertion loss filter', IEEE Ultrasonics Symposium, p. 339, 1988 
    4. R. S. Naik, J. J. Lutsky, and R. Rief, 'Mesurements of the bulk, c-axis electromechanical coupling constants as a function of AIN film quality', IEEE Transaction Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 47, No.1, p. 292, 2000 
    5. R. Ruby, P. Bradley, J. D. Larson, and Y. Oshmyansky, 'PCS 1900 MHz duplexer using thin film bulk acoustic resonator', Electronics letters, Vol. 35, No. 10, p. 794, 1999 
    6. J. D. Larson, R. Ruby, P. Bradley, and Y. Oshmyansky, 'A BAW antenna duplexer for the 1900 MHz PCS Band', IEEE Ultrasonics Symposium, p. 887, 1999 
    7. L. M. Lakin, G. R. Kline, and K. T. Macarron, 'High-Q microwave acoustic resonators and filter', IEEE transactions on Microwave Theory and Techniques, Vol. 41, No. 12, p. 2139, 1993 
    8. W. P. Mason, 'Electromechanical Transducers and Wave Filters', D. Van Nostrand, New York, 1942 
    9. W. M. Leach Jr., 'Controlled-source analogous circuits and SPICE models for piezoelectric transducers', IEEE Trans UFFC, Vol. 41, p. 60, 1994 
    10. S. V. Krishnaswamy, S. S. Horwitz, and R. A. Moore, 'Microwave film bulk acoustic resonator and manifold filter bank', U.S. Patent 5 185 589, 1993 
    11. W. P. Mason, 'Physical Acoustic Principles and Methods', Academic press, Newyork, 1964 

 저자의 다른 논문

  • 최형욱 (21)

    1. 1998 "Sol-Gel법으로 제작된 광메모리영역 PLZT박막의 전기적 특성" 전기전자재료학회논문지 = Journal of the Korean institute of electronic material engineers 11 (1): 57~61    
    2. 1998 "Sol-Gel법으로 제작한 X/65/35 (X=6~11) PLZT 박막의 전기 및 광학 특성" 전기전자재료학회논문지 = Journal of the Korean institute of electronic material engineers 11 (3): 237~241    
    3. 1998 "Sol-Gel 법으로 제작된 PLZT 박막의 Zr/Ti 비에 따른 구조 특성에 관한 연구" 전기전자재료학회논문지 = Journal of the Korean institute of electronic material engineers 11 (7): 535~540    
    4. 2000 "Screen Printing법을 이용한 PMN-PZT 후막의 제조 및 특성 연구" 전기전자재료학회논문지 = Journal of the Korean institute of electronic material engineers 13 (11): 921~925    
    5. 2000 "수직자기기록매체용 Co-Cr 박막의 자기적 특성 개선에 관한 연구" 전기전자재료학회논문지 = Journal of the Korean institute of electronic material engineers 13 (5): 444~450    
    6. 2001 "PLD법에 의한 14/50/50 PLZT박막의 제작과 특성평가" 전기전자재료학회논문지 = Journal of the Korean institute of electronic material engineers 14 (5): 417~422    
    7. 2002 "Co-Cr(-Ta)/Si 이층막의 자기적 특성" 전기전자재료학회논문지 = Journal of the Korean institute of electronic material engineers 15 (3): 281~286    
    8. 2002 "RF 마그네트론 스퍼터링에 의한 SAW 필터용 ZnO 압전 박막에 관한 연구" 전기전자재료학회논문지 = Journal of the Korean institute of electronic material engineers 15 (9): 798~807    
    9. 2003 "FBAR용 ZnO/SiO2Si 박막의 결정학적 특성에 관한 연구" 전기전자재료학회논문지 = Journal of the Korean institute of electronic material engineers 16 (8): 711~715    
    10. 2004 "Two-Step 방식을 이용한 수직자기 기록용 Co-Cr-Ta 박막의 제작" 전기전자재료학회논문지 = Journal of the Korean institute of electronic material engineers 17 (7): 793~796    
  • 이승규 (1)

  • 박용서 (13)

  • 김경환 (39)

  • 신현용 (16)

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
  • NDSL :
  • 전기전자재료학회논문지 : 저널
유료다운로드

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 출판된 논문 + 더보기