본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

열시효 처리에 따른 상아질 접착 계면의 탄성계수의 변화 비교
Comparison of the elastic modulus among three dentin adhesives before and after thermocycling

장주혜    (서울대학교 치의학전문대학원   ); 이인복    (서울대학교 치의학전문대학원   ); 조병훈    (서울대학교 치의학전문대학원   ); 김혜영    (서울대학교 치의학생명과학사업단   ); 손호현    (서울대학교 치의학전문대학원  );
  • 초록

    본 연구는 현재 시판되고 있는 여러 개의 상아질 접착제를 임상 술식에서와 같은 방법으로 사용한 후 열 시효처리를 통해 노화 과정을 재현한 다음 접착 계면의 탄성계수를 측정함으로써 가수분해에 따른 물성변화를 관찰 비교하고자 했다. 발거 한 지 2 주일 이내인 영구 대구치 21 개의 상아질 표면이 노출되도록 삭제하였다. 각각 7개의 치아에 시판되고 있는 3가지 상아질 접착제 (OptiBond FL, Clearfil SE, Xeno III)를 적용한 뒤 광중합 복합 레진(Premisa, Kerr, Orange, CA, USA) 를 1 mm 두께로 쌓아 올렸다. 각 치아를 이등분하여 절반 시편은 100,000회의 열 시효 처리를 가하도록 했다. Nanoindentation test를 통하여 각 시편의 adhesive layer와 hybrid layer의 탄성계수를 측정, 비교하였다. 열시효 처리 후 Xeno III군의 탄성계수가 통계학적으로 유의할 만한 감소를 보였다 (p


    The purpose of this study was to determine the effects on the elastic moduli of the adhesive and the hybrid layer from thermocycling. Twenty one human molars were used to create flat dentin surfaces. Each specimen was bonded with a light-cured composite using one of three commercial adhesives (OptiBond FL [OP], Clearfil SE Bond [CL], and Xeno III [XE]). These were sectioned into two halves and subsequently cut to yield 2-mm thickness specimens; one specimen for immediate bonding test without thermocycling and the other subjected to 10,000 times of thermocycling. Nanoindentation test was performed to measure the modulus of elasticity of the adhesive and the hybrid layer, respectively, using an atomic force microscope. After thermocycling, XE showed a significant decrease of the modulus in the adhesive layer (p


  • 주제어

    탄성 계수 .   열시효 처리.  

  • 참고문헌 (32)

    1. Carrilho MR, Tay FR, Pashley DH, Tjaderhane L, Carvalho RM. Mechanical stability of resin-dentin bond components. Dent Mater 21:232-241, 2005 
    2. Inoue G, Tsuchiya S, Nikaido T, Foxton RM, Tagami J. Morphological and mechanical characterization of the acid-base resistant zone at the adhesive-dentin interface of intact and caries-affected dentin. Oper Dent 31:466-472, 2006 
    3. Donmez N, Belli S, Pashley DH, Tay FR. Ultrastructural correlates of in vivo/in vitro bond degradation in self-etch adhesives. J Dent Res 84:355- 359, 2005 
    4. Reis AF, Giannini M, Pereira PN. Long-term TEM analysis of the nanoleakage patterns in resin-dentin interfaces produced by different bonding strategies. Dent Mater 23(9):1164-1172, 2007 
    5. Senawongse P, Harnirattisai C, Otsuki M, Tagami J. Effect of LED light-curing time for the adhesive resin on the modulus of elasticity. Am J Dent 20:139-141, 2007 
    6. Tay FR, Suh BI, Pashley DH, Prati C, Chuang SF, Li F. Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part II. Single-bottle, total-etch adhesive. J Adhes Dent 5:91-105, 2003 
    7. Dijken JW, Sunnegardh-Gronberg K, Lindberg A. Clinical long-term retention of etch-and-rinse and selfetch adhesive systems in non-carious cervical lesions A 13 years evaluation. Dent Mater 23:1101-1107, 2007 
    8. Marshall GW, Jr., Balooch M, Gallagher RR, Gansky SA, Marshall SJ. Mechanical properties of the dentinoenamel junction: AFM studies of nanohardness, elastic modulus, and fracture. J Biomed Mater Res 54:87-95, 2001 
    9. Oliveira SS, Marshall SJ, Habelitz S, Gansky SA, Wilson RS, Marshall GW, Jr. The effect of a self-etching primer on the continuous demineralization of dentin. Eur J Oral Sci 112:376-383, 2004 
    10. Oliver WC PG. An improved technique for determining hardness and elastic modulus using load and displacemen sensing indentaion experimens. J Mater Res 7:1564-1583,1992 
    11. De Munck J, Van Meerbeek B, Yoshida Y, Inoue S, Vargas M, Suzuki K et al. Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res 82:136-140, 2003 
    12. Xu HH, Smith DT, Jahanmir S, Romberg E, Kelly JR, Thompson VP et al. Indentation damage and mechanical properties of human enamel and dentin. J Dent Res 77:472-480, 1998 
    13. Toledano M, Osorio R, Osorio E, Aguilera FS, Yamauti M, Pashley DH et al. Durability of resin-dentin bonds: effects of direct/indirect exposure and storage media. Dent Mater 23:885-892, 2007 
    14. Ito S, Hashimoto M, Wadgaonkar B, Svizero N, Carvalho RM, Yiu C et al. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials 26:6449-6459, 2005 
    15. Yuan Y, Shimada Y, Ichinose S, Tagami J. Qualitative analysis of adhesive interface nanoleakage using FESEM/ EDS. Dent Mater 23(5):561-569, 2007 
    16. Malacarne J, Carvalho RM, de Goes MF, Svizero N, Pashley DH, Tay FR et al. Water sorption/solubility of dental adhesive resins. Dent Mater 22:973-980, 2006 
    17. Reis AF, Giannini M, Pereira PN. Effects of a peripheral enamel bond on the long-term effectiveness of dentin bonding agents exposed to water in vitro. J Biomed Mater Res B Appl Biomater (in press) 6:6, 2007 
    18. Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 27:89- 99, 1999 
    19. Drummond JL. Nanoindentation of dental composites. J Biomed Mater Res B Appl Biomater 78:27-34, 2006 
    20. Angker L, Nockolds C, Swain MV, Kilpatrick N. Correlating the mechanical properties to the mineral content of carious dentine--a comparative study using an ultra-micro indentation system (UMIS) and SEMBSE signals. Arch Oral Biol 49:369-378, 2004 
    21. Koshiro K, Inoue S, Tanaka T, Koase K, Fujita M, Hashimoto M et al. In vivo degradation of resin-dentin bonds produced by a self-etch vs. a total-etch adhesive system. Eur J Oral Sci 112:368-375, 2004 
    22. Hashimoto M, Ohno H, Sano H, Kaga M, Oguchi H. In vitro degradation of resin-dentin bonds analyzed by microtensile bond test, scanning and transmission electron microscopy. Biomaterials 24:3795-3803, 2003 
    23. Breschi L, Mazzoni A, Ruggeri A, Cadenaro M, Di Lenarda R, De Stefano Dorigo E. Dental adhesion review: Aging and stability of the bonded interface. Dent Mater (in press) 16:16, 2007 
    24. Ge J, Cui FZ, Wang XM, Feng HL. Property variations in the prism and the organic sheath within enamel by nanoindentation. Biomaterials 26:3333-3339, 2005 
    25. Hashimoto M, Ohno H, Sano H, Tay FR, Kaga M, Kudou Y et al. Micromorphological changes in resindentin bonds after 1 year of water storage. J Biomed Mater Res 63:306-311, 2002 
    26. Hosoya Y, Tay FR. Hardness, elasticity, and ultrastructure of bonded sound and caries-affected primary tooth dentin. J Biomed Mater Res B Appl Biomater 81:135-141, 2007 
    27. Reis AF, Giannini M, Pereira PN. Influence of waterstorage time on the sorption and solubility behavior of current adhesives and primer/adhesive mixtures. Oper Dent 32:53-59, 2007 
    28. Van Meerbeek B, Willems G, Celis JP, Roos JR, Braem M, Lambrechts P et al. Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area. J Dent Res 72:1434-1442, 1993 
    29. Toledano M, Osorio R, Albaladejo A, Aguilera FS, Osorio E. Differential effect of in vitro degradation on resin-dentin bonds produced by self-etch versus totaletch adhesives. J Biomed Mater Res A 77:128-135, 2006 
    30. Burrow MF, Inokoshi S, Tagami J. Water sorption of several bonding resins. Am J Dent 12:295-298, 1999 
    31. Hosaka K, Tagami J, Nishitani Y, Yoshiyama M, Carrilho M, Tay FR et al. Effect of wet vs. dry testing on the mechanical properties of hydrophilic self-etching primer polymers. Eur J Oral Sci 115:239-245, 2007 
    32. Doerner MF NW. A method for interpreting the data from depth-sensing indentation instruments 1:601- 609, 1986 

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
유료다운로드
  • 원문이 없습니다.

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 출판된 논문 + 더보기