본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

Journal of mechanical science and technology v.24 no.6, 2010년, pp.1235 - 1244   SCIE
본 등재정보는 저널의 등재정보를 참고하여 보여주는 베타서비스로 정확한 논문의 등재여부는 등재기관에 확인하시기 바랍니다.

Investigation of the fracture characteristics of the interfacial bond between bone and cement: experimental and finite element approaches

Chiang, Fu-Tsai    (Department of Orthopedic, Taichung Armed forces General Hospital   ); Hung, Jui-Pin    (Department of Mechanical Engineering, National Chin-Yi University of Technology  );
  • 초록

    This study integrated the finite element method, fracture mechanics, and three-point bending test to investigate the fracture characteristics of the interfacial bond between bone and cement. The fracture tests indicated that the interfacial fracture toughness of the bone/cement specimens was $0.34\;MN/m^{3/2}$ , with a standard deviation of $0.11\;MN/m^{3/2}$ , which was in good agreement with the experimental data available in the literature. A finite element model of the experimental testing specimen was used to predict the critical stress intensity factor (SIF) at the fracture load by the proposed fracture analysis method. The critical SIF of the opening mode of the interface crack was $0.392\;MN/m^{3/2}$ , which was slightly higher than the fracture toughness obtained in the experiment. Additionally, considering the coupled effects of the crack opening mode and shearing mode, the critical effective SIF was $0.411\;MN/m^{3/2}$ , with a phase angle of $17.2^{\circ}$ . Comparisons of the results obtained from the bending test and numerical analysis made it obvious that the fracture characteristics of the bonded interface between the bone and cement could be accurately predicted by the proposed model. With this analysis model, a realistic investigation on the debonding behavior of cemented artificial prosthetic components is highly expected.


  • 주제어

    Bone/cement interface .   Fracture toughness .   Stress intensity factor.  

  • 참고문헌 (50)

    1. W. H. Harris, The first 32 years of total hip arthroplasty: one surgeon's perspective. Clinical Orthopaedics and Related Research, 274 (1992) 6-11. 
    2. C. G. Mohler, J. J. Callaghan, D. K. Collis and R. C. Johnston, Early loosening of the femoral component at the cement- prosthesis: interface after total hip replacement The Journal of Bone and Joint Surgery, 77 A (1995) 1315-1322. 
    3. H. C. Amstutz and P. Campebell, Mechanism and clinical significance of wear debris-induced osteolysis. Clinical Orthopaedics and Related Research, 276 (1992) 7-18. 
    4. M. Jasty, W. J. Maloney, C. R. Bradgon, T. Haire and W. H. Harris, Histomorphological studies of the long-term skeltal responses to well fixed cemented femoral components. The Journal of Bone and Joint Surgery, 72 (1990) 1220-1229. 
    5. N. Verdonschot and R. Huiskes, Cement debonding process of total hip arthroplasty stems. Clinical Orthopaedics and Related Research, 336 (1997) 297-307. 
    6. R. P. Robinson, T. P. Lovell, T. M. Green and G. A. Baliey, Early femoral component loosening in DF-80 total hip arthroplasty. Journal of Arthroplasty, 4 (1989) 55-64. 
    7. M. Jasty, W. J. Maloney, C. R. Bradgon, D. OConnor, T. Haire and W. H. Harris, The initiation offailure in cemented femoral components of hip arthoplasties. The Journal of Bone and Joint Surgery, 3B (1991) 551-558. 
    8. T. P. Culleton, P. J. Prendergast and D. Taylor, Fatigue failure in the cement mantle of an artificial hip joint. Clinical Material, 12 (1993) 95-102. 
    9. L. D. T. Topoleski, P. Ducheyne and J. M. Taylor, A fractographic analysis of in vivo polymethlmethacrylate bone cement failure mechanism. Journal of Biomedical Materials Research, 24 (1990) 145-154. 
    10. K. A. Mann, D. C. Ayers, F. W. Wemer, R. J. Nicoletta and M. D. Fortino, Tensile strength of the cement-bone interface depends on the amount of the bone interdigitation with PMMA cement. Journal of Biomechanics, 30 (4) (1997) 339-346. 
    11. K. Masaki, T. Jiro, S. Shuichi, K. Keiichi, N. Masashi and K. Tadashi, Interfacial tensile strength between polymethylmethacrylate based bioactive bone cement and bone. Journal of Biomedical Materials Research, 63 (5) (2002) 564-571. 
    12. J. Li, H. Liao, B. Fartash, L. Hermansson and T. Johson, T. Surface dimpled commercially pure titanium implant and bone ingrowth. Biomaterials, 18 (1997) 691-696. 
    13. S. Wang, W. R. Lacefield and J. E. Lemons, Interfacial shear strength and histology of plasma sprayed and sintered hydroxyapatite implants in vivo. Biomaterials, 17 (1996) 1945-1970. 
    14. P. C. Paris and F. A. Erdogan, A critical analysis of crack propagation laws. Trans ASME J Basic Engineering, 58D (1963) 528-534. 
    15. M. Zor, M. Kucuk and S. Aksoy, Residual stress effects on fracture energies of cement-bone and cement-implant interfaces. Biomaterials, 23 (7) (2002) 1595-1601. 
    16. B. H. Miller, H. Nakajima, J. M. Powers and M. E. Nunn, Bond strength between cements and metals used for endodontic posts. Dental Materials, 14 (5) (1998) 312-320. 
    17. D. H. Pashley, H. Sano and B. Ciucchi, Adhesion testing of dentin bonding agents: A review. Dental Materials, 11 (1998) 312-320. 
    18. American Society for Testing and Materials (ASTM), Standard E399-83, Standard test methods'for plane strain fracture toughness and strain energy released rate of plastic materials. Annual Book of ASTM Standards, 1987. 
    19. K. A. Mann, R. Mocarski, L. A. Darnron, M. J. Alien and D. C. Ayers, Mixed-mode failure response of the cementbone interface. Journal of Orthopedic Research, 19 (6) (2001) 1153-1161. 
    20. N. Choupani, Interfacial mixed-mode fracture characterization of adhesively bonded joints. International Journal of Adhesion and Adhesives, 28 (6) (2008) 267-282. 
    21. G. P. Nikishkow and S. N. Atluri, Calculation of fracture mechanics parameters for an arbitrary three-dimensional crack, by equivalent domain integral method. International Journal for Numerical Methods in Engineering, 24 (9) (1987)1801-1821. 
    22. K. N. Shivakumar and J. C. Newman, ZIP3D - an elastic and elastic-plastic finite-element analysis program for cracked bodies. Technical memorandum NASA-TP-102753. June, 1990. 
    23. G. R. Irwin, Analysis of stresses and strains near the end of a crack traversing a plate. Journal of Apply Mechanics, 24 (1957) 361-364. 
    24. G. De Roeck and M. M. Abdel Wahab, Strain energy release rate formulae for 3D finite element. Engineering Fracture Mechanics, 50 (4) (1995) 569-580 
    25. K. A. Mann, D. L. Bartel, T. M. Wright and A. H. Burstein, Coulomb frictional interfaces in mode ling cemented total hip replacements: a more realistic model. Journal of Biomechanics, 28 (9) (1995) 1067-1078. 
    26. P. Lucksanasombool, W. A. J. Higgs, R. J. E. D. Higgs and M. V. Swain, Interfacial fracture toughness between bovine cortical bone and cements. Biomaterials, 24 (2003)1159-1166. 
    27. P. Lucksanasombool, W. A. J. Higgs, M. Ignat, R. J. E. D. Higgs and M. V. Swain, Comparison of failure characteristics of a range of cancellous bone-bone cement composites. Journal of Biomedical Materials Research, 64 (1) (2003) 93-104. 
    28. X. Wang and C. M. Agrawal, Interfacial fracture toughness of tissue-biomaterial systems. Journal of Biomedical Materials Research, 38 (11) (1997) 1-10. 
    29. J. Graham, M. Ries and L. Pruitt, Effect of Bone Porosity on the Mechanical Integrity of the Bone-Cement Interface. The Journal of Bone and Joint Surgery, 85 (10) (2003) 1901-1909. 
    30. K. A. Mann, D. C. Ayers, F. W. Wemer, R. J. Nicoletta and M. D. Fortino, Tensile strength of the cement-bone interface de- pends on the amount of the bone interdigitation with PMMA cement. Journal of Biomechanics, 30 (4) (1997) 339-346. 
    31. D. Arola, K.A. Stoffel and D. T. Yang, Fatigue of the cement/ bone interface: the surface texture of bone and loosening. Journal of Biomedical Materials Research, 76 (2) (2006) 287-297. 
    32. C. S. Oishi, R. H. Walker and C. W. Colwell, The femoral component in total hip arthroplasty. Six to eight-year followup of one hundred consecutive patients after use of a thirdgeneration cementing technique. The Journal of Bone and Joint Surgery, 76 (8) (1994) 1130-1136. 
    33. W. F. Mulroy, D. M. Estok and W. H. Harris, Total hip arthroplasty with use of so-called second-generation cementing techniques. A fifteen-year-average follow-up study. The Journal of Bone and Joint Surgery, 77 (12)(1995) 1845-1852. 
    34. W. MacDonald, E. Swarts and R. Beaver, Penetration and shear strength of cement-bone interfaces in vivo. Clinical Orthopaedics and Related Research, 286 (1993) 283-288. 
    35. M. M. Panjabi, V. K. Goel, H. Drinker, J. Wong, G. Kamire and S. D. Waiter, S. D. Effect of pressurization on methylmethacrylate-bone interdigitation: an in vitro study of canine femora. Journal of Biomechanics, 16 (7) (1983) 473-480. 
    36. R. S. Majkowski, A. W. Milles and G. C. Bannister, Bone surface preparation in cemented joint replacement. The Journal of Bone and Joint Surgery, 75 (B) (1993) 459-463 
    37. K. M. Oates, D. L. Barrera, W. N. Tucker, C. C. Chau, W. D. Bugbee and F. R. Convery, In vivo effect of pressurization of polymethylmethacrylate bone-cement. Biomechanical and histological analysis. Journal of Arthroplasty, 10 (3) (1995) 373-381. 
    38. D. J. Bean, F. R. Convery, S. L. Woo and R. L. Lieber, Regional variation in shear strength of the bone-polymethylmethacrylate interface. Journal of Arthroplasty, 2 (4) (1987) 293-298. 
    39. K. A. Mann, F. W. Werner and D. C. Ayers, Mechanical strength of the cement-bone interface is greater in shear than in tension. Journal of Biomechanics, 32 (11) (1999) 1251-1254. 
    40. X. Wang, A. Subramanian, R. Dhanda and M. Agrawal, Testing of bone-biomaterial interfacial bonding strength: a comparison of different techniques. Journal of Biomedical Materials Research, 33 (1996) 133-138. 
    41. N. Verdonschot and R; Huiskes, The effect of cement-stem debonding in THA on the long-term failure probability of cement. Journal of Biomechanics, 30 (8) (1997) 795-802. 
    42. P. Colombi, Fatigue analysis of cemented hip prosthesis: damage accumulation scenario and sensitivity analysis. International Journal of Fatigue, 24 (2002) 739-746. 
    43. B. Lennon, B. A. O. McCormack and P. J. Prendergast, The relationship between fatigue and implant surface finish in proximal femoral prostheses. Medical Engineering & Physics, 25 (2003) 833-841. 
    44. B. A. O. McCormack, P. J. Prendergast and D. G. Gallagher, Experimental study of damage accumulation in cemented hip prostheses. Clinical Biomechanics, 11 (1996) 214-219. 
    45. J. P. Hung, J. S. S.Wu and J. H. Chen, Effects of interfacial debonding on fatigue Damage of cemented hip prosthesis. Journal of the Chinese Institute of Engineer, 26 (4) (2003) 791-801. 
    46. X. Wang and C. M. Agrawal, A mixed mode fracture toughness test of bone-biomaterial interfaces. Journal of Biomedical Materials Research, 53 (2003) 664-672. 
    47. M. S. Alam and M. A. Wahab, Modeling the fatigue crack growth and propagation life of a joint of two elastic materials using interface elements. International Journal of Pressure Vessels & Piping, 82 (2005) 105-113. 
    48. M. Ogiso, M. Yamaura, P. T. Kuo, D. Borgese and T. Matsumoto, Comparative push out test of dense HA implant and HA coated implanted: findings in a canine study. Journal of Biomedical Materials Research, 39 (1998) 364-372. 
    49. S. Yang and F. G. Yuan, Determination and representation of the stress coefficient terms by path-independent integrals in anisotropic cracked solids. International Journal of Fracture, 101 (2000) 291-319. 
    50. M. A. Perze, J. Grasa, J. M. Garica-Aznar, A. Beaj and M. Doblare, Probabilistic analysis of the influence of the bonding degree of the stem-cement interface in the performance of cemented hip prostheses. Journal of Biomechanics, 39 (2006) 1859-1872. 

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
  • 원문이 없습니다.
유료다운로드

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 출판된 논문 + 더보기