본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

Steel & Composite structures : an international journal v.12 no.1, 2012년, pp.53 - 72   SCIE
본 등재정보는 저널의 등재정보를 참고하여 보여주는 베타서비스로 정확한 논문의 등재여부는 등재기관에 확인하시기 바랍니다.

Compression failure and fiber-kinking modeling of laminated composites

Ataabadi, A. Kabiri    (Department of Mechanical Eng., Isfahan University of Technology   ); Ziaei-Rad, S.    (Department of Mechanical Eng., Isfahan University of Technology   ); Hosseini-Toudeshky, H.    (Department of Aeronatical Eng., Amirkabir University of Technology  );
  • 초록

    In this study, the physically-based failure models for matrix and fibers in compression and tension loading are introduced. For the 3D stress based fiber kinking model a modification is proposed for calculation of the fiber misalignment angle. All of these models are implemented into the finite element code by using the advantage of damage variable and the numerical results are discussed. To investigate the matrix failure model, purely in-plane transverse compression experiments are carried out on the specimens made by Glass/Epoxy to obtain the fracture surface angle and then a comparison is made with the calculated numerical results. Furthermore, shear failure of $({\pm}45)_s$ model is investigated and the obtained numerical results are discussed and compared with available experimental results. Some experiments are also carried out on the woven laminated composites to investigate the fracture pattern in the matrix failure mode and shown that the presented matrix failure model can be used for the woven composites. Finally, the obtained numerical results for stress based fiber kinking model and improved ones (strain based model) are discussed and compared with each other and with the available results. The results show that these models can predict the kink band angle approximately.


  • 주제어

    laminated composite .   compression .   fiber-kinking .   matrix failure.  

  • 참고문헌 (25)

    1. Argon, A. S. (1972), Fracture of composites, in: Treatise on Materials Science and Technology, Academic Press, New York, 79-114. 
    2. ASTM Standard D3518/D3518M,(2001), Standard test method for in-plane shear reponse of polymer matrix composite materials by tensile test of a +/? 45 laminate, (2001). 
    3. ASTM Standard D3039/D3039M-00, Standard test method for tensile properties of polymer matrix composite materials, (2000). 
    4. Budiansky, B. (1983), "Micromechanics", Computers and Structures 16(1-4), 3-12. 
    5. Budiansky, B. and Fleck, N. A. (1993), "Compressive failure of fibre composites", J. Mec. Phys. Soli. 41(1), 183-211. 
    6. Budiansky, B., Fleck, N. A. and Amazigo , J. C. (1998), "On kink-band propagation in fiber composites", J. Mech. Phys. Solid, 46(9), 1637-1653. 
    7. Bing, Q. and Sun, C.T. (2008), Specimen size effect in off-axis compression tests of fiber composites, Comp. Eng., Part B 39(1), 20-26. 
    8. Christensen, R. M. and Deteresa , S. J. (1997), "The kink band mechanism for the compressive failure of fiber composite materials", J. Appli. Mech., 64(1). 
    9. Davila, C. G., Jaunky , N. and Goswami, S. (2003), "Failure criteria for FRP laminates in plane stress", in: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Paper 1991-2003. 
    10. Davila, C. G. and Camanho, P. P. (2003), "Failure criteria for FRP laminates in plane stress", Tech. Rep. NASA/TM-2003-212663, National Aeronautics and Space Administration, U.S.A. 
    11. Davis Jr, J. G. (1975), "Compressive strength of fiber-reinforced composite materials", in: Composite Reliability, ASTM STP 580, Americal Society for Testing and Materials, Philadelphia, 364-377. 
    12. De Ferran, M. E. and Harris, B. (1970), "Compression strength of polyester resin reinforced with steel wires", J. Comp. Mat, 4(1), 62-72. 
    13. Kyriakides, S., Arseculeratne, R. and Perry, E. J. (1995), "On the compressive failure of fiber reinforced composites", Inter. J. Solids. Struct., 32(6/7), 689-738. 
    14. Lager, J. R. and June, R. R. (1969), "Compressive strength of boron-epoxy composites", J. Comp. Mater. 3(1), 48-56. 
    15. Liu, D., Fleck , N. A. and Sutcliffe, M. P. F. (2004), "Compressive strength of fiber composite with random fiber waviness", J. Mech. Phys. Solid 52(7), 1481-1505. 
    16. Puck, A. and Schurmann, H. (1998), "Failure analysis of FRP laminates by means of physically based phenomenological models", Comp. Sci.Techno. 58(7), 1045-1067. 
    17. Puck, A. and Schurmann, H. (2002), "Failure analysis of FRP laminates by means of physically based phenomenological models", Comp. Science. Techno. 62(12-13), 1633-1662. 
    18. Pinho, S.T. (2005), "Modelling failure of laminated composites using physically-based failure models", Imperial College London. 
    19. Pinho, S. T., Robinson, P. and Iannucci, L. (2006), "Fracture toughness of the tensile and compressive fiber failure modes in laminated composites", Comp. Science . Techno., 66(13), 2069-2079. 
    20. Pinho, S.T., Iannucci, L. and Robinson, P. (2006), "Physically based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking. Part II: FE implementation, Applied science and manufacturing", 37(1), 766-777. 
    21. Pimenta, S., Gutkin, R., Pinho, S. T. and Robinson P. (2009), "A micromechanical model for kink-band formation: Part II- Analytical modeling", Compo. Sci. Techno, 69(7-8), 956-964. 
    22. Rosen, V. W. (1965), "Mechanics of composite strengthening", Fiber Composite Materials American Society of Metals, Metals Park, Ohio 37-75. 
    23. Schultheisz, C. R. and Waas, A. M. (1996), "Compressive failure of composites", part I: Testing and micromechanical theories, Progress in Aerospace Sciences 32(1), 1-42. 
    24. Shuart, M. J. (1989), "Failure of compression-loaded multidirectional composite laminates", AIAA Journal 27, 1274-1279. 
    25. Singh, S.B. and Kumar, Dinesh (2010), "Postbuckling response and failure of symmetric laminated plates with rectangular cutouts under in-plane shear", Structural Engineering and Mechanics, An Int\'l Journal 34(2). 

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
  • 원문이 없습니다.
유료다운로드

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 출판된 논문 + 더보기