본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

Steel & Composite structures : an international journal v.12 no.1, 2012년, pp.73 - 92   SCIE 피인용횟수: 2
본 등재정보는 저널의 등재정보를 참고하여 보여주는 베타서비스로 정확한 논문의 등재여부는 등재기관에 확인하시기 바랍니다.

Effect of element interaction and material nonlinearity on the ultimate capacity of stainless steel cross-sections

Theofanous, M.    (Department of Civil Engineering, Aristotle University of Thessaloniki   ); Gardner, L.    (Department of Civil and Environmental Engineering, Imperial College London  );
  • 초록

    The effect of element interaction and material nonlinearity on the ultimate capacity of stainless steel plated cross-sections is investigated in this paper. The focus of the research lies in cross-sections failing by local buckling; member instabilities, distortional buckling and interactions thereof with local buckling are not considered. The cross-sections investigated include rectangular hollow sections (RHS), I sections and parallel flange channels (PFC). Based on previous finite element investigations of structural stainless steel stub columns, parametric studies were conducted and the ultimate capacity of the aforementioned cross-sections with a range of element slendernesses and aspect ratios has been obtained. Various design methods, including the effective width approach, the direct strength method (DSM), the continuous strength method (CSM) and a design method based on regression analysis, which accounts for element interaction, were assessed on the basis of the numerical results, and the relative merits and weaknesses of each design approach have been highlighted. Element interaction has been shown to be significant for slender cross-sections, whilst the behaviour of stocky cross-sections is more strongly influenced by the material strain-hardening characteristics. A modification to the continuous strength method has been proposed to allow for the effect of element interaction, which leads to more reliable ultimate capacity predictions. Comparisons with available test data have also been made to demonstrate the enhanced accuracy of the proposed method and its suitability for the treatment of local buckling in stainless steel cross-sections.


  • 주제어

    classification .   cross-section .   element interaction .   local buckling .   numerical modelling .   slenderness .   stainless steel .   stub column.  

  • 참고문헌 (50)

    1. ABAQUS. (2006), ABAQUS/Standard user's manual volumes I-III and ABAQUS CAE manual. Version 6.6. (Pawtucket, USA): Hibbitt, Karlsson & Sorensen, Inc. 
    2. Adany, S. and Schafer, B.W. (2008), "A full modal decomposition of thin-walled, single-branched open cross-section members via the constrained finite strip method", J. Constr. Steel Res., 64(1), 12-29. 
    3. American Society of Civil Engineers (ASCE) (2002), Specification for the design of cold-formed stainless steel structural members (SEI/ASCE 8-02). 
    4. Ashraf, M., Gardner, L. and Nethercot, D.A. (2006a), "Compression strength of stainless steel cross-sections", J. Constr. Steel Res., 62(1-2), 105-115. 
    5. Ashraf, M., Gardner, L. and Nethercot, D.A. (2006b), "Finite element modelling of structural stainless steel cross-sections", Thin Wall Struct., 44(10), 1048-1062. 
    6. Ashraf, M., Gardner, L. and Nethercot, D. A. (2008), "Structural stainless steel design: Resistance based on deformation capacity", J. Struct. Eng., ASCE, 134(3), 402-411. 
    7. Baddoo, N. R. (2008), "Stainless steel in construction: A review of research, applications, challenges and opportunities", J. Constr. Steel Res., 64(11), 1199-1206. 
    8. Beg, D. and Hladnik, L. (1996), "Slenderness limit of class 3 I cross-sections made of high strength steel", J. Constr. Steel Res., 38(3), 201-217. 
    9. Becque, J., Lecce, M. and Rasmussen, K.J.R. (2008), "The direct strength method for stainless steel compression members", J. Constr. Steel Res., 64(11), 1231-1238. 
    10. Cruise, R.B. and Gardner, L. (2008), "Strength enhancements induced during cold forming of stainless steel sections", J. Constr. Steel Res., 64(11), 1310-1316. 
    11. Daali, M.L. and Korol, R.M. (1995), "Prediction of local buckling and rotation capacity at maximum moment", J. Constr. Steel Res., 32(1), 1-13. 
    12. Dawson, R.G. and Walker, A.C. (1972), "Post-buckling of geometrically imperfect plates", J. Struct. Div., ASCE, 98(1), ST1, 75-94. 
    13. ECSC (2000), Final Report. ECSC project-Development of the use of stainless steel in construction. Document RT810, Contract No. 7210 SA/ 842, The Steel Construction Institute, UK. 
    14. EN 1993-1-1 (2005) Eurocode 3. Design of Steel Structures: Part 1-1: General rules and rules for buildings, CEN. 
    15. EN 1993-1-4. (2006) Eurocode 3: Design of steel structures - Part 1.4: General rules - Supplementary rules for stainless steel, CEN. 
    16. EN 1993-1-5 (2006), Eurocode 3. Design of Steel Structures: Part 1-5: Plated structural elements, CEN. 
    17. Gardner, L. (2008), "The continuous strength method", Proceedings of the Institution of Civil Engineers-Structures and Buildings, 161(3), 127-133. 
    18. Gardner, L. and Ashraf, M. (2006), "Structural design for non-linear metallic materials", Eng. Struct., 28(6), 926-934. 
    19. Gardner, L. and Nethercot, D.A. (2004a), "Experiments on stainless steel hollow sections - Part 1: Material and cross-sectional behaviour", J. Constr. Steel Res., 60(9), 1291-1318. 
    20. Gardner L. and Nethercot D.A. (2004b), "Experiments on stainless steel hollow sections - Part 2: Member behaviour of columns and beams", J. Constr. Steel Res., 60(9), 1319-1332. 
    21. Gardner, L. and Nethercot D.A. (2004c), "Numerical Modeling of Stainless Steel Structural Components-A Consistent Approach", J. Struct. Eng., ASCE, 130(10), 1586-1601. 
    22. Gardner, L. and Ng, K. T. (2006). "Temperature development in structural stainless steel sections exposed to fire", Fire Safety Journal, 41(3), 185-203. 
    23. Gardner, L., Talja, A. and Baddoo, N. (2006), "Structural design of high-strength austenitic stainless steel", Thin Wall Struct., 44(5), 517-528. 
    24. Gardner, L. and Theofanous, M. (2008), "Discrete and continuous treatment of local buckling in stainless steel elements", J. Constr. Steel Res., 64(11), 1207-1216. 
    25. Groth, H.L. and Johansson, R.E. (1990), "Statistics of the mechanical strength of stainless steels", Proceeding of the Nordic Symposium on Mechanical Properties of Stainless Steels SIMR, Sigtuna, Sweden, October, 17-31. 
    26. Johnson, A.L. and Winter, G. (1966), "Behaviour of stainless steel columns and beams", J. Struct. Div., ASCE, ST5, 97-118. 
    27. Kato B. (1989), "Rotation capacity of H-section members as determined by local buckling", J. Constr. Steel Res., 13(2-3), 95-109. 
    28. Kato B. (1990), "Deformation capacity of steel structures", J. Constr. Steel Res., 17(1-2), 33-94. 
    29. Kuwamura H. (2003), "Local buckling of thin-walled stainless steel members", Steel Structures, 3, 191-201. 
    30. Liu Y. and Young B. (2003), "Buckling of stainless steel square hollow section compression members", J. Constr. Steel Res., 59(2), 165-177. 
    31. Mirambell, E. and Real, E. (2000), "On the calculation of deflections in structural stainless steel beams: an experimental and numerical investigation", J. Constr. Steel Res., 54(1), 109-133. 
    32. North American Specification. (2004), "Appendix 1: Design of cold-formed steel structural members using the Direct Strength Method", In: 2004 supplement to the North American Specification for the design of cold-formedsteel structures. Washington (DC): American Iron and Steel Institute. 
    33. Rasmussen, K.J.R. (2003), "Full-range stress-strain curves for stainless steel alloys", J, Constr. Steel Res., 59(1), 47-61. 
    34. Rasmussen K.J.R. and Hancock G.J. (1993a), "Design of cold-formed stainless steel tubular members. I: Columns", J. Struct. Eng., ASCE, 119(8), 2349-2367. 
    35. Rasmussen, K.J.R. and Hancock, G.J. (1993b), "Design of cold-formed stainless steel tubular members II: Beams", J. Struct. Eng., ASCE, 119(8), 2368-2386. 
    36. Real, E. and Mirambell, E. (2005), "Flexural behaviour of stainless steel beams", Eng. Struct., 27(10), 1465-1475. 
    37. Schafer, B.W. (2008), "Review: The Direct Strength Method of cold-formed steel member design", J. Constr. Steel Res., 64(7-8), 766-778. 
    38. Schafer, B.W., Adany, S. (2006), "Buckling analysis of cold-formed steel members using CUFSM: conventional and constrained finite strip methods", Eighteenth International Specialty Conference on Cold-Formed Steel Structures, Orlando, FL. October. 
    39. Schafer, B.W, Pekoz, T. (1998), "Direct strength prediction of cold-formed steel members using numerical elastic buckling solutions". In: Shanmugam N., Liew, J., Thevendran, V. editors. Thin-walled structures, research and developments. NewYork: Elsevier, 137-144. 
    40. Standards Australia (2005), "Cold-formed steel structures. AS/NZS 4600: 2005", Sydney, Australia. 
    41. Talja A. and Salmi P. (1995), "Design of stainless steel RHS beams, columns and beam-columns", Research note 1619. Finland: VTT Building Technology. 
    42. Theofanous, M. and Gardner, L. (2009), "Testing and numerical modelling of lean duplex stainless steel hollow section columns", Eng. Struct., 31(12), 3047-3058. 
    43. Theofanous, M. and Gardner, L. (2010), "Experimental and numerical studies of lean duplex stainless steel beams", J. Constr. Steel Res., 66(6), 816-825. 
    44. Winter, G. (1947), "Strength of thin steel compression flanges", Bulletin No. 35/3, Engrg. Experiment Sta., Cornell University, Ithaca, N.Y. 
    45. Winter, G. (1950), "Performance of thin steel compression flanges", Bulletin No. 33, Engrg. Experiment Sta., Cornell University, Ithaca, N.Y 
    46. Young, B. and Ellobody, E. (2006), "Experimental investigation of concrete-filled cold-formed high strength stainless steel tube columns", J. Constr. Steel Res., 62(5), 484-492. 
    47. Young, B. and Liu, Y. (2003), "Experimental investigation of cold-formed stainless steel columns", J. Struct. Eng., ASCE, 129(2), 169-176. 
    48. Young, B. and Lui, W. M. (2006), "Tests of cold formed high strength stainless steel compression members", Thin Wall Struct., 44(2), 224-234. 
    49. Zhou, F. and Young, B. (2005), "Tests of cold-formed stainless steel tubular flexural members", Thin Wall Struct., 43(9), 1325-1337. 
    50. Zhu, J.-H. and Young, B. (2009), "Design of aluminium alloy flexural members using the direct strength method", J. Struct. Eng., ASCE, 135(5), 558-566. 
  • 이 논문을 인용한 문헌 (2)

    1. 2014. "" Steel & Composite structures : an international journal, 17(3): 253~269   
    2. 2016. "" Steel & Composite structures : an international journal, 21(3): 629~659   

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
  • 원문이 없습니다.
유료다운로드

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 출판된 논문 + 더보기