본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

韓國海洋工學會誌 = Journal of ocean engineering and technology v.32 no.5, 2018년, pp.310 - 323  
본 등재정보는 저널의 등재정보를 참고하여 보여주는 베타서비스로 정확한 논문의 등재여부는 등재기관에 확인하시기 바랍니다.

A60급 구획 적용 격벽 관통용 관의 열전달 특성 I: 관의 설계에 따른 과도 열해석
Heat Transfer Characteristics of Bulkhead Penetration Piece for A60 Class Compartment I: Transient Thermal

박우창   (목포대학교 조선해양공학과  ); 송창용   (목포대학교 조선해양공학과  ); 나옥균   (현대삼호중공업(주)  );
  • 초록

    In order to protect lives and prevent large-scale injuries in the event of a fire on a ship or an offshore plant, most classification societies are strengthening their fire resistance designs of relevant cargo holds and accommodation compartments to keep flames from being transferred from a fire point to other compartments. Particularly in critical compartments, where flames should not propagate for a certain period of time, such as the A60 class division, both the airtightness and fire-resistant design of a piece passing through a bulkhead are subject to the Safety of Life at Sea Convention (SOLAS) issued by the International Maritime Organization (IMO). In order to verify the suitability of a fire-resistant design for such a penetrating piece, the fire test procedure prescribed by the Maritime Safety Committee (MSC) must be carried out. However, a numerical simulation should first be conducted to minimize the time and cost of the fire resistance test. In this study, transient thermal analyses based on the finite element method were applied to investigate the heat transfer characteristics of a bulkhead penetration piece for the A60 class compartment. In order to determine a rational bulkhead penetration piece design, the transient heat transfer characteristics according to the variation of design parameters such as the diameter, length, and material were reviewed. The verification of the design specification based on a numerical analysis of the transient heat transfer performed in this study will be discussed in the following research paper for the actual fire protection test of the A60 class bulkhead penetration piece.


  • 주제어

    선박 및 해양플랜트 화재 사고 .   A60급 구획 .   격벽 관통 관 .   과도 열전달 해석 .   관통관 설계.  

  • 이미지/표/수식 (12)

    논문관련 이미지

  • 참고문헌 (18)

    1. ABS, 2018. Mobile Offshore Drilling Units - Part 5 Fire and Safety. Rules for Building and Classing, USA. 
    2. Barletta, A., Lazzari, S., Zanchini, E., Terenzi, A., 2008. Transient Heat Transfer from an Offshore Buried Pipeline during Start-up Working Conditions. Heat Transfer Engineering, 29(11), 942-949. 
    3. Goodfellow, 1993. Metals, Alloys, Compounds, Ceramics, Polymers, Composites Catalogue 1993/94. GoodfellowMetals Ltd., Cambridge. 
    4. Huh, C., Kang, S.G., Hong, S., Choi, J.S., Baek, J.H., 2008. Thermal-Hydraulic Analysis of Pipeline Transport System for Marine Geological Storage of Carbon Dioxide. Journal of Ocean Engineering and Technology, 22(6), 88-94. 
    5. IMO, 2010. International Convention for the Safety of Life at Sea. SOLAS 1999/2000 Amendment, UK. 
    6. Kang, G.I., Kwak, S.Y., Park, C.S., 2017. Design and Evaluation of the Thermal Capability to Secure a Working Time of Cryogenic Explosion-proof Camera in LNG Carrier Tank. International Journal of Naval Architecture and Ocean Engineering, 9, 568-576. 
    7. Kothandaraman, C.P., Subramanyan, S., 2004. Heat and Mass Transfer Data Book. 5th Edition, New Age International (P) Ltd., India. 
    8. Lee, J., Song, C.Y., 2013. Estimation of Submerged-arc Welding Design Parameters using Taguchi Method and Fuzzy Logic. Journal of Engineering Manufacture, 227(4), 532-542. 
    9. Lee, J.C., Seo, Y.K., Lee, C.J., 2012. A Study on the Anti-icing Performance Evaluating and Design Guide by Heating Coil for Upper Deck of Icebreaking Vessels. Journal of the Society of Naval Architects of Korea, 49(6), 541-549. 
    10. Moon, J.G., Park, J.C., Kwon, Y.H., Yoo W.S., Ahn, S.W., 2010. Study of Heat Transfer and Safety Evaluation for Heating Coils in the Fuel Tank of a Ship. Journal of Ocean Engineering and Technology, 24(5), 22-30. 
    11. MSC(Maritime Safety Committee), 2010. Adoption of the International Code for Application of Fire Test Procedures. MSC.307(88), UK. 
    12. MSC software, 2017. MSC.NASTRAN User's Manual. MSC software, USA. 
    13. Murawski, L., 2018. Thermal Interaction Between Main Engine Body and Ship Hull. Ocean Engineering, 147, 107-120. 
    14. Oh, J.S., Lee, I.S., Yoon, H.K., Sung, H.K., 2017. Thermal and Structural Analyses of Semi-metallic Gasket Joined with Graphite Seal for Ship Engine Piping Flange. Journal of Ocean engineering and Technlogy, 31(5), 352-356. 
    15. Promat, 2018. Thermal Characteristics. [Online] Available at : [Accessed 04 April. 2018]. 
    16. Soe, Y.H., Tanabe, I., Iyama, T., Da Cruz, J.R., 2012. Estimation Tool for Optimum Cutting Condition of Difficult to Cut Materials. Journal of Machine Engineering, 12(1), 76-88. 
    17. Yunus, A.C., Afshin, J.G., 2012. Heat and Mass Transfer:Fundamentals and Applications. 4th Edition, McGraw-Hill Education Korea, Korea. 
    18. Zhou, B., Han, X,. Guo, W., Liu, Y., Tan, S.K., 2017. Numerical and Experimental Study on Cutting Access Opening in Ship Structure. Journal of Ship Production and Design, 33(1), 12-23. 

 저자의 다른 논문

  • Song, Chang-Yong (12)

    1. 2010 "구조 최적설계를 위한 다양한 근사 최적화기법의 적용 및 비교에 관한 연구" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A 34 (11): 1603~1611  
    2. 2011 "FPSO Riser 지지구조의 설계최적화에 대한 근사화 기법의 비교 연구" 한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea 24 (5): 543~551    
    3. 2011 "Hydroelastic Effects in Vibration of Plate and Ship Hull Structures Contacted with Fluid" International journal of ocean system engineering 1 (2): 76~88    
    4. 2012 "동수력학 해석 기반 부유식 해양 플랫폼의 동적 운동 및 계류력 산정" 韓國海洋工學會誌 = Journal of ocean engineering and technology 26 (2): 48~57    
    5. 2013 "멤브레인 LNG 선박용 강화 폴리우레탄폼의 극저온 거동 연구" 韓國海洋工學會誌 = Journal of ocean engineering and technology 27 (1): 74~79    
    6. 2016 "10MW급 부유식 파력-풍력 복합발전 시스템 플랫폼 초기설계를 위한 위상최적화 응용" 한국해양환경ㆍ에너지학회지 = Journal of the Korean Society for Marine Environment & Energy 19 (3): 194~202    
    7. 2017 "Dynamic Response Analyses of Fixed Type Substructures for 2.5MW Class Offshore Wind Turbine" Journal of advanced research in ocean engineering 3 (1): 15~24    
    8. 2017 "스캔도면 기반 선실바닥의장 생산관리 시스템 개발" 韓國海洋工學會誌 = Journal of ocean engineering and technology 31 (2): 141~154    
    9. 2018 "유체-구조 연성해석 기반 해저케이블 위해인자의 수중낙하 특성 비교" 韓國海洋工學會誌 = Journal of ocean engineering and technology 32 (5): 324~332    
    10. 2019 "실험계획법을 이용한 대형 선박용 레이더 마스트의 공진회피 설계" 韓國海洋工學會誌 = Journal of ocean engineering and technology 33 (1): 50~60    
  • 나옥균 (0)

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
유료다운로드

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 출판된 논문 + 더보기