본문 바로가기
HOME> 논문 > 논문 검색상세

논문 상세정보

한국수소 및 신에너지학회 논문집 = Transactions of the Korean Hydrogen and New Energy Society v.29 no.5, 2018년, pp.512 - 522  
본 등재정보는 저널의 등재정보를 참고하여 보여주는 베타서비스로 정확한 논문의 등재여부는 등재기관에 확인하시기 바랍니다.

메탈화이버 버너에서 매트 두께와 연료 종류에 따른 복사 효율 및 연소 특성에 관한 실험적 연구
Experimental Study on the Radiation Efficiency and Combustion Characteristics with Respective to the Mat Thickness and the Fuel Kinds in Metal-Fiber Burner

김재현   (순천대학교 대학원 우주항공공학전공  ); 이기만   (순천대학교 기계우주항공공학부  );
  • 초록

    This study was conducted to investigate on the combustion characteristic with the effects of mat thickness and fuel kinds in a metal-fiber burner. The mode transition point is confirmed by the K value, which was defined as the rate of flow velocity and laminar burning velocity. The ( $T^4_{sur}-T^4_{\infty}$ ) is highest at methane flame with 3 T thickness. Through the measurement of the unburned mixture temperature, the possibility of submerged flame in surface combustion burner was confirmed. The rapid emission of CO occurs nearby limit blow out (LBO) because of the increase of flow velocity. In case of NOx, the trend is similar with surface temperature. However, it also considered that the NOx emission is affected by residence time with flame position.


  • 주제어

    표면 연소 .   메탈화이버 .   합성 천연가스 .   다공성 매체 버너 .   복사 효율 .   배가스 특성.  

  • 참고문헌 (18)

    1. S. Wood and A. T. Harris, "Porous burners for lean-burn applications", Progress in Energy and Combustion Science, Vol. 34, 2008, pp. 667-684. 
    2. I. Cerri, M. Pavese, G. Saracco, and V. Specchia, "Premixed metal fibre burners based on a Pd catalyst", Catalysis Today, Vol. 83, 2003, pp. 19-31. 
    3. P. H. Lee, S. S. Hwang, and J. K. Kim, "Combustion characteristics of premixed combustor using nickel based metal foam", Journal of the Korean Society of Combustion, Vol. 22, 2017, pp. 42-49. 
    4. M. M. Abdelaal, M. K. El-Riedy, and A. M. El-Nahas, "Effect of oxygen enriched air on porous radiant burner performance and NO emissions", Experimental Thermal and Fluid Science, Vol. 45, 2013, pp. 163-168. 
    5. K. Qiu and A. C. S. Hayden, "Premixed gas combustion stabilized in fiber felt and its application to a novel radiant burner", Fuel, Vol. 85, 2006, pp. 1094-1100. 
    6. Y. Kotani and T. Takeno, "An experimental study on stability and combustion characteristics of an excess enthalpy flame", Proceeding Combustion Institute, Vol. 19, 1982, pp. 1503-1509. 
    7. M. A. Mujeebu, M. Z. Abdullah, and A. A. Mohamad, "Development of energy efficient porous medium burners on surface and submerged combustion modes", Energy, Vol. 36, 2011, pp. 5132-5139. 
    8. B. J. Vogel and J. L. Ellzey, "Subadiabatic and superadiabatic performance of a two-section porous burner", Combust. Sci. and Tech, Vol. 177, 2005, pp. 1323-1338. 
    9. V. Bubnovich, M. Toledo, L. Henriquez, C. Rosas, and J. Romero, "Flame stabilization between two beds of alumina balls in a porous burner", Applied Thermal Engineering, Vol. 30, 2010, pp. 92-95. 
    10. B. G. Yu, S. M. Kum, C. E. Lee, and S. R. Lee, "Combustion characteristics and thermal efficiency for for premixed porous-media types of burners", Energy, Vol. 53, 2013, pp. 343-350. 
    11. V. N. Kornilov, S. Shakariyants, and L. P. H. de Goey, "Novel burner concept for premixed surface-stabilized combustion", Proceeding of ASME Turbo Expo 2012, Vol. 2, 2012, pp. 795-801. 
    12. A. Colorado and V. McDonell, "Surface stabilized combustion technology: An experimental evaluation of the extent of its fuel-flexibility and pollutant emissions using low and high calorific value fuels", Applied Thermal Engineering, Vol. 136, 2018, pp. 206-218. 
    13. S. A. Hashemi, M. Nikfar, and R. Motaghedifard, "Experimental study of operating range and radiation efficiency of a metal porous burner", Thermal Science, Vol. 19, 2015, pp. 11-20. 
    14. S. A. Leonardi, R. Viskanta, and J. P. Gore, "Radiation and thermal performance measurements of a metal fiber burner", Journal of Quantitative Spectroscopy & Radiative Transfer, Vol. 73, 2002, pp. 491-501. 
    15. Y. Nakamura, Y. Itaya, K. Miyoshi, and M. Hasatani, "Mechanism of methane-air combustion on the surface of a porous ceramic plate", Journal of Chemical Engineering of Japan, Vol. 26, No. 2, 1993, pp. 205-211. 
    16. C. E. Arrieta and A. A. Amell, "Combustion analysis of an equimolar mixture of methane and syngas in a surface-stabilized combustion burner for household appliances", Fuel, Vol. 137, 2014, pp. 11-20. 
    17. K. W. Cho, K. W. Han, Y. K. Lee, D. S. Noh, H. M. Yoon, K. J. Riu, and K. H. Lee, "Premixed combustion of coke oven gas in a metallic fibre mat", Fuel, Vol. 80, 2001, pp. 1033-1036. 
    18. UC Sandiego mechanism webpage, Available at http://web.eng.ucsd.edu/mae/groups/combustion/mechanism.html. 

 활용도 분석

  • 상세보기

    amChart 영역
  • 원문보기

    amChart 영역

원문보기

무료다운로드
  • NDSL :
유료다운로드

유료 다운로드의 경우 해당 사이트의 정책에 따라 신규 회원가입, 로그인, 유료 구매 등이 필요할 수 있습니다. 해당 사이트에서 발생하는 귀하의 모든 정보활동은 NDSL의 서비스 정책과 무관합니다.

원문복사신청을 하시면, 일부 해외 인쇄학술지의 경우 외국학술지지원센터(FRIC)에서
무료 원문복사 서비스를 제공합니다.

NDSL에서는 해당 원문을 복사서비스하고 있습니다. 위의 원문복사신청 또는 장바구니 담기를 통하여 원문복사서비스 이용이 가능합니다.

이 논문과 함께 이용한 콘텐츠
이 논문과 함께 출판된 논문 + 더보기