본문 바로가기
HOME> 저널/프로시딩 > 저널/프로시딩 검색상세

저널/프로시딩 상세정보

권호별목차 / 소장처보기

H : 소장처정보

T : 목차정보

바이오시스템공학 = Journal of biosystems engineering 11건

  1. [국내논문]   친환경 정밀농업을 위한 입제 변량살포기 개발(IV) - 살포성능 평가와 살포율에 따른 분두 조절 방법 -   피인용횟수: 2

    김영주 (Research Institute for Agriculture and Life Sciences, Seoul National University ) , 이중용 (Research Institute for Agriculture and Life Sciences, Seoul National University)
    바이오시스템공학 = Journal of biosystems engineering v.32 no.6 ,pp. 383 - 388 , 2007 , 1738-1266 ,

    초록

    In precision farming, proper calibration and operation of a variable rate machine are critical to reduce input of agrochemicals and to ensure productivity and quality of agricultural products. As an effort to introduce precision farming to rice production in Korea, a pneumatic granular applicator was developed. This investigation intended to evaluate the application performance such as application accuracy, application uniformity and to suggest how to adjust the blow-heads to get uniform application pattern, and to suggest a practical way of adjustment of the blow-heads for uniform application. Tests to evaluate the application performance were conducted. The application uniformities (CV) in both transverse direction and longitudinal direction were less than 15% and application accuracy was greater than 81%. A simple method for adjusting the inserting length of blow-heads was suggested.

    원문보기

    원문보기
    무료다운로드 유료다운로드

    회원님의 원문열람 권한에 따라 열람이 불가능 할 수 있으며 권한이 없는 경우 해당 사이트의 정책에 따라 회원가입 및 유료구매가 필요할 수 있습니다.이동하는 사이트에서의 모든 정보이용은 NDSL과 무관합니다.

    NDSL에서는 해당 원문을 복사서비스하고 있습니다. 아래의 원문복사신청 또는 장바구니담기를 통하여 원문복사서비스 이용이 가능합니다.

    이미지

    Fig. 1 이미지
  2. [국내논문]   스털링기관 재생기내의 작동유체 유속 및 마찰저항 특성(I) - 작동유체 유속 특성 -  

    김태한 (Dept. of Bio-industry Machinery Engineering, Kyungpook National University ) , 조창래 (Dept. of Bio-industry Machinery Engineering, Kyungpook National University)
    바이오시스템공학 = Journal of biosystems engineering v.32 no.6 ,pp. 389 - 394 , 2007 , 1738-1266 ,

    초록

    The power output of the stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide basic data for the design of the regenerator matrix, characteristics of working fluid velocities were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, two different wire screens were used. The results are summarized as follows; 1. When a regenerator is not filled with any wire screen, working fluid velocity of the oscillating flow shows 1.3 times faster than that of one directional flow. 2. When a regenerator is filled with the wire screen of No.50, working fluid velocity of the oscillating flow reveals 2.5 times faster than that of one directional flow. 3. When a regenerator is filled with the wire screen of No. 100, working fluid velocity of the oscillating flow shows 2 times faster than that of one directional flow, regardless of the number of packed wire screens. 4. Working fluid velocity is decreased wire the increase in number of meshes and packed wire screens.

    원문보기

    원문보기
    무료다운로드 유료다운로드

    회원님의 원문열람 권한에 따라 열람이 불가능 할 수 있으며 권한이 없는 경우 해당 사이트의 정책에 따라 회원가입 및 유료구매가 필요할 수 있습니다.이동하는 사이트에서의 모든 정보이용은 NDSL과 무관합니다.

    NDSL에서는 해당 원문을 복사서비스하고 있습니다. 아래의 원문복사신청 또는 장바구니담기를 통하여 원문복사서비스 이용이 가능합니다.

    이미지

    Fig. 1 이미지
  3. [국내논문]   줄기 엽채소의 기계적 파지시 리올로지 특성  

    전현종 (National Institute of Agricultural Engineering (NIAE) ) , 김상헌 (Division of Agricultural Engineering, Kangwon National University)
    바이오시스템공학 = Journal of biosystems engineering v.32 no.6 ,pp. 395 - 402 , 2007 , 1738-1266 ,

    초록

    This study was carried out as basic researches to develop the leaf vegetable harvester. This study was conducted to investigate physical and rheological properties of bundled leaf vegetables with stem (Chinese leek, Crown daisy and Chamnamul) as test materials held and picked-up by a machine. Stress-strain behavior, stress relaxation, and strain recovery for the bundled materials were analyzed using simple Maxwell model. Physical and rheological properties of the materials were investigated by measuring rupture load, deformation and stress experimentally. Also, strain recovery time when unloading was measured using super high speed camera. Recorded recovery time for stress-strain behavior was0.026 s for Chinese leek with liner strain recovery, 0.046 s for Crown daisy and 0.05 s for Chamnamul with non-linear strain recovery. Furthermore, the strain recovery time for permanent deformation was 0.026 s, 0.046 s, and 0.05 s for Chinese Leek, Crown daisy and Chamnamul, respectively. Finally, strain recovery time and strain recovery ratio for the test materials were 0.17 s, 60.4% in Chinese leek, 0.12 s, 55.3% in Crown daisy, 0.15 s, 58.7% in Chamnamul. Here strain recovery time means that how fast the test materials are recovered from initial deformation and strain recovery ratio means how much the test materials are recovered from initial deformation. The above results show that the test materials can be held enough and moved by the belts.

    원문보기

    원문보기
    무료다운로드 유료다운로드

    회원님의 원문열람 권한에 따라 열람이 불가능 할 수 있으며 권한이 없는 경우 해당 사이트의 정책에 따라 회원가입 및 유료구매가 필요할 수 있습니다.이동하는 사이트에서의 모든 정보이용은 NDSL과 무관합니다.

    NDSL에서는 해당 원문을 복사서비스하고 있습니다. 아래의 원문복사신청 또는 장바구니담기를 통하여 원문복사서비스 이용이 가능합니다.

    이미지

    Fig. 1 이미지
  4. [국내논문]   유채씨의 방습 평형함수율   피인용횟수: 3

    김유호 (National Institute of Agricultural Engineering ) , 한재웅 (Dept. of Bio-Mechatronic Engineering SungKyunKwan University ) , 금동혁 (Dept. of Bio-Mechatronic Engineering SungKyunKwan University)
    바이오시스템공학 = Journal of biosystems engineering v.32 no.6 ,pp. 403 - 407 , 2007 , 1738-1266 ,

    초록

    This study was performed to determine desorption equilibrium moisture contents(EMC) of rapeseed grown in Korea. EMC values were measured by static method using saturated salt solutions at three temperature levels of 30, 40 and $50^{\circ}C$ , and eight relative humidity levels in the range from 11.0 to 83.6%. The measured EMC values were fitted to Chung-Pfost, Modified Halsey, Modified Henderson and Modified Oswin models by using nonlinear regression analysis. The results of root mean square errors for four models showed that Halsey and Modified Oswin Models could serve as good models, but the Chung-Pfost and Modified Henderson models could not show reasonably good fitting.

    원문보기

    원문보기
    무료다운로드 유료다운로드

    회원님의 원문열람 권한에 따라 열람이 불가능 할 수 있으며 권한이 없는 경우 해당 사이트의 정책에 따라 회원가입 및 유료구매가 필요할 수 있습니다.이동하는 사이트에서의 모든 정보이용은 NDSL과 무관합니다.

    NDSL에서는 해당 원문을 복사서비스하고 있습니다. 아래의 원문복사신청 또는 장바구니담기를 통하여 원문복사서비스 이용이 가능합니다.

    이미지

    Fig. 1 이미지
  5. [국내논문]   엽채류 세척, 살균, 탈수 시스템 개발   피인용횟수: 7

    홍성기 (National Institute of Agricultural Engineering ) , 박회만 (National Institute of Agricultural Engineering ) , 조광환 (National Institute of Agricultural Engineering ) , 장동일 (Department of Bioindustrial Machinery Engineering, Chungnam National University)
    바이오시스템공학 = Journal of biosystems engineering v.32 no.6 ,pp. 408 - 415 , 2007 , 1738-1266 ,

    초록

    Leaf vegetables are composed of about 80% of moisture and 20 to 30% are damaged during the transportation due to decomposition and browning. This study was conducted to develop a washing, sterilization dehydrating system that could remove these polluters, and major findings were summarized as followings. The system was constructed so that leaf vegetables were moved through the washing, sterilization, and dehydration stages contained in a box, the shifting was conducted using PLC-controlled pneumatic pressure. Basic tests for determination of design parameters led to the results that optimum washing times by air bubbles were 5 minutes for lettuce and perilla and 10 minutes for Chinese cabbage, and percentages of bacteria removed using the optimum washing times were 94, 98, and 76%, respectively. Optimum speed and time of a centrifugal dehydrator for removal surface waterdrop on the leaves were 400 rpm and 30 s, respectively, dehydration rates were in a range $70{\sim}82%$ and damage rates were within 15% for the three vegetables tested. Operating efficiencies of the developed system for lettuce, perilla, and Chinese cabbage were 100, 120, and 80 kg/h, respectively, which were 25, 24, and 27 times of operating efficiencies of the conventional manual method.

    원문보기

    원문보기
    무료다운로드 유료다운로드

    회원님의 원문열람 권한에 따라 열람이 불가능 할 수 있으며 권한이 없는 경우 해당 사이트의 정책에 따라 회원가입 및 유료구매가 필요할 수 있습니다.이동하는 사이트에서의 모든 정보이용은 NDSL과 무관합니다.

    NDSL에서는 해당 원문을 복사서비스하고 있습니다. 아래의 원문복사신청 또는 장바구니담기를 통하여 원문복사서비스 이용이 가능합니다.

    이미지

    Fig. 1 이미지
  6. [국내논문]   적정 포장설계를 위한 과실의 바이오 허용 충격지수 추정  

    김기석 (Division of Bioresources Engineering, Chungnam National University ) , 정현모 (Dept. of Packaging Management, Kyongbuk College of Science ) , 김기복 (Division of Metrology for Quality Life, Korea Research Institute of Standards and Science ) , 김만수 (Division of Bioresources Engineering, Chungnam National University)
    바이오시스템공학 = Journal of biosystems engineering v.32 no.6 ,pp. 416 - 421 , 2007 , 1738-1266 ,

    초록

    Physical damage to fruits and vegetables caused by shock degrades the value of product in the fresh market. In order to design a product/packaging system to protect the product, the G-factor to the product that causes shock damage needs to be determined. The shock fragility of organisms such as fruits with a concept correspondent to the G-factor of industrial products was calculated and we defined the allowable bio-shock fragility index as the value divided peak acceleration that was generated in safe drop height by standard acceleration of gravity. We did modeling for safe drop hight that would prevent fruits from damage by drop tests and tried to estimate the allowable bio-shock fragility index of pears and apples for optimum packaging design. The bio-shock fragility index of pears was in the range of $0.74{\sim}2.29\;G$ , while apples had a slightly higher value than that of pears, of $0.51{\sim}2.98\;G$ . This result shows accordance with the general fact that apples have a firmer structure and get less damage from the same impact. Based on this result, it is possible to create an optimum packaging design by providing a damage standard by impact.

    원문보기

    원문보기
    무료다운로드 유료다운로드

    회원님의 원문열람 권한에 따라 열람이 불가능 할 수 있으며 권한이 없는 경우 해당 사이트의 정책에 따라 회원가입 및 유료구매가 필요할 수 있습니다.이동하는 사이트에서의 모든 정보이용은 NDSL과 무관합니다.

    NDSL에서는 해당 원문을 복사서비스하고 있습니다. 아래의 원문복사신청 또는 장바구니담기를 통하여 원문복사서비스 이용이 가능합니다.

    이미지

    Fig. 1 이미지
  7. [국내논문]   냉장 컨테이너 내부의 공기유동 및 열전달 현상에 대한 CFD 시뮬레이션   피인용횟수: 3

    윤홍선 (National Institute of Agricultural Engineering ) , 권진경 (National Institute of Agricultural Engineering ) , 정훈 (National Institute of Agricultural Engineering ) , 이현동 (National Institute of Agricultural Engineering ) , 김영근 (National Institute of Agricultural Engineering ) , 윤남규 (National Institute of Agricultural Engineering)
    바이오시스템공학 = Journal of biosystems engineering v.32 no.6 ,pp. 422 - 429 , 2007 , 1738-1266 ,

    초록

    To prevent deterioration of agricultural products during cold transportation, optimized temperature control is essential. Because the control of temperature and thermal uniformity of transported products are mainly governed by cooling air flow pattern in the transportation equipment, the accurate understanding and removal of appearance of stagnant air zone by poor ventilation is key to design of optimized cooling environment. The objectives of this study were to develop simulation model to predict the airflow and heat transfer phenomena in the cold container and to evaluate the effect of fan blowing velocity on the temperature level and uniformity of products using the CFD approach. Comparison of CFD prediction with PIV measurement showed that RSM turbulent model reveals the more reasonable results than standard $k-{\varepsilon}$ model. The increment of fan blowing velocity improved the temperature uniformity of product and reduced almost linearly the averaged temperature of product.

    원문보기

    원문보기
    무료다운로드 유료다운로드

    회원님의 원문열람 권한에 따라 열람이 불가능 할 수 있으며 권한이 없는 경우 해당 사이트의 정책에 따라 회원가입 및 유료구매가 필요할 수 있습니다.이동하는 사이트에서의 모든 정보이용은 NDSL과 무관합니다.

    NDSL에서는 해당 원문을 복사서비스하고 있습니다. 아래의 원문복사신청 또는 장바구니담기를 통하여 원문복사서비스 이용이 가능합니다.

    이미지

    Fig. 1 이미지
  8. [국내논문]   전산 해석에 의한 파풍망의 설치 효과와 최적 파이프 규격   피인용횟수: 5

    염성현 (National Institute of Agricultural Engineering(NIAE) ) , 권기정 (Korea Aerospace Research Institute ) , 성시흥 (Dept. of Agricultural & Biosystems Engineering, Konkuk University ) , 최영돈 (Dept. of Mechanical Engineering, Korea University)
    바이오시스템공학 = Journal of biosystems engineering v.32 no.6 ,pp. 430 - 439 , 2007 , 1738-1266 ,

    초록

    This study was carried out to(1) visualize the installation effect of an anti-wind net; (2) evaluate structural stability of typical anti-wind nets in Jeju; and (3) present the optimal specification of pipes in an anti-wind net for maximum instant wind velocities of 40 m/s and 45 m/s. The analyses were done for anti-wind nets with a mesh of 4 mm and a height of 3 m by using CFX and ANSYS. The results showed that the wind went down due to flow resistance when passing through an. anti-wind net. The anti-wind net with the supporting pipe being installed every two main columns was certainly unstable because the main column not sustained by the supporting pipe became cantilever. With regard to the position of a fixing point of the supporting pipe, von Mises stress on pipes was certainly increased as vertical positions of the supporting pipe were changed to be too lower or higher than an adequate position but there was little difference according to horizontal positions. The adequate vertical position was $2{\sim}2.5\;m$ high from the ground. For a maximum instant wind velocity of 40 m/s, the optimal specification of pipes was a main column of ${\varphi}48.1{\times}2.1$ t@2,000, cross beams(bottom and top) of ${\varphi}26.7{\times}1.9\;t$ , cross beams(center) of ${\varphi}33.5{\times}2.1$ t/2ea and a supporting pipe of ${\varphi}31.8{\times}1.5$ t@2,000. In case of a maximum instant wind velocity of 45 m/s, the optimal specification of pipes with structural stability was a main column of ${\varphi}48.6{\times}3.25$ t@2,000, cross beams(bottom and top) of ${\varphi}26.7{\times}1.9\;t$ , cross beams(center) of ${\varphi}48.1{\times}2.1$ t/2ea and a supporting pipe of ${\varphi}31.8{\times}1.5$ t@2,000.

    원문보기

    원문보기
    무료다운로드 유료다운로드

    회원님의 원문열람 권한에 따라 열람이 불가능 할 수 있으며 권한이 없는 경우 해당 사이트의 정책에 따라 회원가입 및 유료구매가 필요할 수 있습니다.이동하는 사이트에서의 모든 정보이용은 NDSL과 무관합니다.

    NDSL에서는 해당 원문을 복사서비스하고 있습니다. 아래의 원문복사신청 또는 장바구니담기를 통하여 원문복사서비스 이용이 가능합니다.

    이미지

    Fig. 1 이미지
  9. [국내논문]   살균제 Iprovalicarb 잔류물의 신속한 검출을 위한 바이오센서   피인용횟수: 1

    조한근 (Dept. of Biosystems Engineering, Chungbuk National University ) , 김운호 (Dept. of Biosystems Engineering, Chungbuk National University ) , 경기성 (Dept. of Agricultural Chemisitry, Chungbuk National University ) , 이은영 (Dept. of Agricultural Chemisitry, Chungbuk National University)
    바이오시스템공학 = Journal of biosystems engineering v.32 no.6 ,pp. 440 - 447 , 2007 , 1738-1266 ,

    초록

    In this study, a biosensor was developed using an enzyme-linked immunosorbent assay (ELISA) to rapidly measure the fungicide iprovalicarb residues in agricultural products. The biosensor was designed to include micro-pumps and solenoid valves for fluid transport, a spectrophotometer cuvet as a reaction chamber, a photodiode with a light-emitting diode for optical density measurement, and a control microcomputer to implement assay. The rate of change in optical density of the cuvet was read as final signal output. Micro-pumps were evaluated to investigate their delivery capability, the highest values of the error and the coefficient of variation were 4.3% and 4.6% respectively. As the incubation period was reduced from 15 minutes to 11 minutes to shorten the total processing time, the sensor sensitivity was decreased as the antibody dilution ratio was reduced to a half. The maximum usable period of the coated cuvet was found to be two days with 1% error limit. To predict the concentration of the iprovalicarb residue in agricultural products, a linear calibration model was obtained with r-square values of 0.992 for potato and 0.985 for onion. In validation test for the samples of potatoes and onions against the high performance liquid chromatography, very high correlation values were obtained as 0.996 and 0.993 respectively. Using the cuvet immobilized with antigen, it took 21-minutes for the biosensor to complete the measuring process of the iprovalicarb residues.

    원문보기

    원문보기
    무료다운로드 유료다운로드

    회원님의 원문열람 권한에 따라 열람이 불가능 할 수 있으며 권한이 없는 경우 해당 사이트의 정책에 따라 회원가입 및 유료구매가 필요할 수 있습니다.이동하는 사이트에서의 모든 정보이용은 NDSL과 무관합니다.

    NDSL에서는 해당 원문을 복사서비스하고 있습니다. 아래의 원문복사신청 또는 장바구니담기를 통하여 원문복사서비스 이용이 가능합니다.

    이미지

    Fig. 1 이미지
  10. [국내논문]   다공 세라믹 컵을 이용한 디지털 토양수분 장력계 개발  

    정인규 (National Institute of Agricultural Engineering ) , 장영창 (Konkuk University ) , 김기복 (Safety Metrology Group, Division of Metrology for Quality Life ) , 김용일 (Safety Metrology Group, Division of Metrology for Quality Life ) , 정선옥 (Chungnam National University)
    바이오시스템공학 = Journal of biosystems engineering v.32 no.6 ,pp. 448 - 454 , 2007 , 1738-1266 ,

    초록

    This study was conducted to develop a 100 kPa soil tensiometer mainly consisted of a porous ceramic cup, water-holding tube, and a digital vacuum gauge, through theoretical design analysis and experimental performance evaluation. Major findings were as follows. 1. Theoretical analysis showed that air entry value of a porous media decreased as the maximum effective size of the pore increased, and the maximum diameter of the pores was $2.9\;{\mu}m$ for measuring up a 100 kPa of soil-water tension. 2. Property analysis of tensiometer porous cups supplied in Korean domestic market indicated that main components were $SiO_2$ and $Al_2O_3$ with a porosity range of $33.8{\sim}49.3%$ . 3. The porous cup selected through sample fabrication and air-permeability tests showed weight ratios of 87% and 11% for $Al_2O_3$ and $SiO_2$ . The analysis of SEM (scanning electron microscope) images showed that the sample was sintered at temperatures of about $1150^{\circ}C$ , which consisted of pores with sizes of up to 25% of those for commercial porous cups. 4. The prototype soil tensiometer was fabricated using the developed porous cup and a digital vacuum gauge that could measure water tension with a pressure of 85 kPa in air tests. 5. In-soil tests of the prototype conducted during a period of 25-day drying showed that soil-water tension values measured with the prototype and commercial units were not significantly different, and soil-water characteristic curves could be established for different soils, confirming accuracy and stability of the prototype.

    원문보기

    원문보기
    무료다운로드 유료다운로드

    회원님의 원문열람 권한에 따라 열람이 불가능 할 수 있으며 권한이 없는 경우 해당 사이트의 정책에 따라 회원가입 및 유료구매가 필요할 수 있습니다.이동하는 사이트에서의 모든 정보이용은 NDSL과 무관합니다.

    NDSL에서는 해당 원문을 복사서비스하고 있습니다. 아래의 원문복사신청 또는 장바구니담기를 통하여 원문복사서비스 이용이 가능합니다.

    이미지

    Fig. 1 이미지

논문관련 이미지